RME issues

[d s murray]

Hello

I'm having a couple of problems with my RME which I hope someone can help with. I've had a look over previous posts and studied the manual but still have outstanding questions.

When I change the MIDI channel in the Master menu the setting is not saved on power off. Is that normal?

Also, changing the Master/HP Volume setting to take volume level from presets is not saved on power off.

I've got the VX-352, but I can't seem to get the TS inputs to have any effect. This is a mystery to me because everything else seems to work, ie I can use MOD2 and pot-map a modulation destination and it works...

...which leads me to my final query: I want to set up a patch with the classic combination of PWM pulse and a sawtooth wave. I thought this would be quite easy using my MP201 to generate an LFO to modulate the wave of OSC1, but when I set this up using pot mapping I can't get precisely the range I want, between square and thin pulse. Any ideas?

Best regards

D S

[RL]

Please make sure the boot version is the same as the system version.
You will find these informations in the MASTER menu (Software Version).
Rudi

[d s murray]

Hi Rudi

Yes, it had occurred to me that this might be the issue. The boot version is 3.0, the software 3.5. I was surprised that this was the case, as the unit was recently shipped.

Is it relatively easy to update the boot version?

D S

[RL]

Download RME version 3.5 here:
http://www.moogmusic.com/sites/default/ ... me_web.zip
First load bank B and after that the RME will ask for bank D.