All the SP LIVE PERFORMERS !! issues-solutions

Everything Phatty.
Post Reply
noia
Posts: 3
Joined: Sat May 07, 2011 3:51 pm

All the SP LIVE PERFORMERS !! issues-solutions

Post by noia » Sun May 29, 2011 2:10 pm

All the SP LIVE PERFORMERS

Regarding the moog is a "analog osc machine" that needs retuning, warming up, etc, those might be issues all live performers might be taking care about!!


--> Please, feel free to give suggestions and tricks or tell your experiences about playing shows and/or touring with the SP, this is my most worrying fact about the SP.
Last edited by noia on Tue May 31, 2011 11:17 am, edited 1 time in total.

User avatar
tagirov
Posts: 136
Joined: Mon Sep 06, 2010 2:45 am
Location: Ekaterinburg, Russia
Contact:

Re: All the SP LIVE PERFORMERS !! issues-solutions

Post by tagirov » Mon May 30, 2011 10:47 am

1. Travel Case (original or custom made) - must have!
2. I always warm-up my Phatty at least 15 mins before my set, then turn off auto tuning to avoid '1st note delay' issue (if you don't touch keys ~15 seconds, phatty goes to auto-tuning mode, and then when you start playing, the first note you play sounds with some audible latency - the synth needs some time to revert from auto-tuning mode)
3. I use Perform Set menu to store your favourite presets
4. I use Pot Map feature to assign common contollers. For example, I assign Cutoff to Modulation knob, don't need to switch between cutoff and resonance in panel's Filter section.
Best regards, Ruslan Tagirov.

Toyz: MBPro+Live 9.x+LogicProX, Moog: LP StageII/Sub37/Grandmother/MF-104m/MG-105m, Nord: Stage2 SW73/ModularG2Engine, Roland: MC909/TR-8, Korg: MS-20, R-3, OTO: Bisquit/BIM, etc.

noia
Posts: 3
Joined: Sat May 07, 2011 3:51 pm

Re: All the SP LIVE PERFORMERS !! issues-solutions

Post by noia » Mon May 30, 2011 2:44 pm

That's helpful. Thank you!

banyek
Posts: 59
Joined: Mon Mar 14, 2011 5:09 am
Location: Budapest, Hungary
Contact:

Re: All the SP LIVE PERFORMERS !! issues-solutions

Post by banyek » Tue May 31, 2011 12:39 am

tagirov wrote:1. Travel Case (original or custom made) - must have!
any suggestions for a nice travel case? people say that the lp travel case is way too big...
moog slim phatty, carbon copy mxr, electribe es-1, vermona drm-1, Doepfer A-125, A-106-5, A-143-9, MFOS 16-step sequencer, zoom h2

User avatar
tagirov
Posts: 136
Joined: Mon Sep 06, 2010 2:45 am
Location: Ekaterinburg, Russia
Contact:

Re: All the SP LIVE PERFORMERS !! issues-solutions

Post by tagirov » Tue May 31, 2011 11:22 am

banyek wrote:
tagirov wrote:1. Travel Case (original or custom made) - must have!
any suggestions for a nice travel case? people say that the lp travel case is way too big...
i've got the original ATA travel case, it's really HUGE
i think of buying the soft LP gig bag or order some custom case.
Best regards, Ruslan Tagirov.

Toyz: MBPro+Live 9.x+LogicProX, Moog: LP StageII/Sub37/Grandmother/MF-104m/MG-105m, Nord: Stage2 SW73/ModularG2Engine, Roland: MC909/TR-8, Korg: MS-20, R-3, OTO: Bisquit/BIM, etc.


banyek
Posts: 59
Joined: Mon Mar 14, 2011 5:09 am
Location: Budapest, Hungary
Contact:

Re: All the SP LIVE PERFORMERS !! issues-solutions

Post by banyek » Tue May 31, 2011 3:48 pm

thanks Sir, though i'm in Hungary, and this would only be the need for one gig - so i see no reason why to buy a rack case (yet). i'd rather stick to getting any safe gig bag for a nice price. maybe the LP gig bag would do it anyway, i don't know. it's only my supposition that once the LP is larger, its gig bag is no good for a SP in any way.
moog slim phatty, carbon copy mxr, electribe es-1, vermona drm-1, Doepfer A-125, A-106-5, A-143-9, MFOS 16-step sequencer, zoom h2

Lazerface
Posts: 17
Joined: Sun Sep 12, 2010 11:24 pm

Re: All the SP LIVE PERFORMERS !! issues-solutions

Post by Lazerface » Thu Jun 02, 2011 10:12 pm

4. I use Pot Map feature to assign common contollers. For example, I assign Cutoff to Modulation knob, don't need to switch between cutoff and resonance in panel's Filter section.
Never thought of that, cheers!

I've never had a problem with lag with the auto-tune..maybe i just havent noticed it yet,
anyway I find by time I've turned it on, gone through soundcheck etc, at least 15min has passed so it's all warm and yummy.

Live, I use the LP with the Moog multi-pedal controlling the mod wheel via midi,
also the multi pedal sends a Sample and Hold signal to my ring mod frequency input, so with the mix at about 10'oclock on the ring mod there's a swampy S/H rhythm tickling the moog bass.

On top of that I have the LP controlling a Korg Ms2000R for a bit of polyphony in the background/top end, doing strings and other weird noises on top of the moog bass.

So at the end, I have 6 oscillators firing at once, 7 if you include the ring mod :twisted:

Sigue Sigue Huil
Posts: 21
Joined: Sat Jan 22, 2011 10:52 am

Re: All the SP LIVE PERFORMERS !! issues-solutions

Post by Sigue Sigue Huil » Fri Jun 03, 2011 6:01 am

If you have a midi controller make sure you have a decent power source.

My power cable on my controller came loose, only took half a second to get it back in but the SP was stuck ringing the same note and you'll have to cycle the power.

Can take a good few seconds to be back where you can start playing again.

I also like to keep a tuner plugged into the headphone out - you can just hit the output button to kill the main audio out and tweak the tuning between songs - this is especially good if you don't have enough time for it to fully warm up.

Post Reply