Slightly different finish to metal faceplate on phaser

impact studios · Post by **impact studios** » Sun May 03, 2009 8:20 am

Hi

I have just bought a new Moogerfooger Phaser and noticed that the metal faceplate has a textured finish, rather than the smooth finish on the ringmod i already own...
Is this rare or are they all being made with this finish now....

Paul

dave500 · Post by **dave500** » Sun May 03, 2009 9:07 am

My new ringmod's faceplate is textured so it must be the standard way now.

Vitja B · Post by **Vitja B** » Sun May 03, 2009 11:44 am

My LPF is like that...others are old ones...and delay print is kinda crap...

Ring is OK...but I think the ones with this sharp finish are more reliable.

soundxplorer · Post by **soundxplorer** » Sun May 03, 2009 9:11 pm

Vitja B wrote:I think the ones with this sharp finish are more reliable.

How so?

I like the look of the textured finish on my phaser better than the flat older ones. But I haven't heard of any difference in build quality.

Vitja B · Post by **Vitja B** » Mon May 04, 2009 6:19 am

I meant that printing is better,just that.

impact studios · Post by **impact studios** » Mon May 04, 2009 10:18 am

Does anyone know if the textured finish is also on the newer cp-251's...?

mgrfgrmadness · Post by **mgrfgrmadness** » Mon May 04, 2009 11:46 am

my phaser has a smooth texture but my 101,102, and 105 all have the textured i got the phaser in mid 07 and the rest last year so thats when the switch would have occurred

DeFrag · Post by **DeFrag** » Mon May 04, 2009 5:27 pm

any closeup pics of the two types?

soundxplorer · Post by **soundxplorer** » Tue May 05, 2009 9:43 am

If no one else posts pics today, I'll try to remember to take some when I get home tonight.

soundxplorer · Post by **soundxplorer** » Tue May 05, 2009 10:02 pm

Here's a pic:

http://i41.tinypic.com/2807i2p.jpg

DeFrag · Post by **DeFrag** » Wed May 06, 2009 12:08 am

I hardly ever noticed.

My MF-101 & MF-103 both have the rough finish while the
MF-102, MF-104Z, MF-105, & MF-107 sport the smooth.

CTRLSHFT · Post by **CTRLSHFT** » Wed May 06, 2009 2:01 am

weird didn't know they did this, all mine are the smooth finish. neat, i hope it was more than a cosmetic upgrade, maybe this helps the screen printing last longer.

Wavezero · Post by **Wavezero** » Mon Apr 26, 2010 3:58 am

I dont like the new finish, it doesnt have the old modular module look..
i like it when everything looks like a set.

EMwhite · Post by **EMwhite** » Mon Apr 26, 2010 8:16 am

impact studios wrote:Hi

I have just bought a new Moogerfooger Phaser and noticed that the metal faceplate has a textured finish, rather than the smooth finish on the ringmod i already own...
Is this rare or are they all being made with this finish now....

Paul

Likely a result of their now offering lunar white finish (of the body). Could be a different paint shop? I'm about to order a white RingMode w/Black wood... wonder if I'll regret that later? (too trendy)

.

EricK · Post by **EricK** » Mon Apr 26, 2010 9:22 am

Hey,
My Theremin had a smooth finish, but when I upgraded it to a plus it was a porous finish.
My RIngmod and Delay are smooth, the Freqbox is porous.
MidiMurf is porous.
THe cp251 is smooth, but the Vx351 has a screen printed overlay glued on.
Taurus Pedals-overlay.

Voyager performer was smooth, Voyager Select has overlay (due to backlighting).

I think this is a relatively new switch (within the last year or two. I believe that the porous metal finish rejects fingerprints better but I really prefer the smooth finish. Id rather have them all the same, but thats just me being OCD about my gear.

I think the white faced Moogs will be the rarest in the long run. Theres already over 10,000 + Ringmods out there, and alot of customers might not be aware of Novamusik and their increadible prices if they are just looking to buy a Fooger they are more likely to go to a catalog dealer I theorize.

Eric

Moog Music Forum

Slightly different finish to metal faceplate on phaser

Slightly different finish to metal faceplate on phaser

Re: Slightly different finish to metal faceplate on phaser

Re: Slightly different finish to metal faceplate on phaser

Re: Slightly different finish to metal faceplate on phaser