Interconnecting Moogerfoogers

Plug in here for info tips and strategies for your Moogerfooger Analog Effects. Connect more than one for plenty of fun!
Post Reply
soundresearch
Posts: 17
Joined: Thu Sep 18, 2008 1:14 am
Contact:
Contact soundresearch

Interconnecting Moogerfoogers

Post by soundresearch » Sat Jul 18, 2009 2:48 pm

hello,If youve seen the moog moogerfooger video then you may know what Im wanting to do.Im wanting to use just my moogerfoogers but having trouble configuring them and needing help.Im wanting to use my low pass filter for my tone which I can turn on and off and from there connect the 102,104,105,107. Am I making any sense? Im wanting to throw in the CP 251 in there somewhere but not worried about that at the moment.Any help would be appreciated thanks -j
Top
Bryan T
Posts: 812
Joined: Mon Mar 06, 2006 4:23 pm

Re: Interconnecting Moogerfoogers

Post by Bryan T » Sat Jul 18, 2009 3:09 pm

soundresearch wrote:hello,If youve seen the moog moogerfooger video then you may know what Im wanting to do.Im wanting to use just my moogerfoogers but having trouble configuring them and needing help.Im wanting to use my low pass filter for my tone which I can turn on and off and from there connect the 102,104,105,107. Am I making any sense? Im wanting to throw in the CP 251 in there somewhere but not worried about that at the moment.Any help would be appreciated thanks -j
I'm not really sure what you are asking . . .
Top
Lux_Seeker
Posts: 473
Joined: Thu Mar 26, 2009 8:44 pm

Post by Lux_Seeker » Sat Jul 18, 2009 5:55 pm

I am also not sure what you are asking. You don't really configure foogers. They are intended to be experimented with. If you understand what all the CV ins and outs do it might help you to figure out what to do. The manuals can help but if you have a specific type of configuration in mind ask.
Top
Post Reply

Return to “Moogerfooger Forum”