
Little Phatty "In your studio" pix
-
- Posts: 75
- Joined: Thu Dec 31, 2009 5:37 am
I'm a chemical engineer, but I don't work in that field.
Lately I finished an audio recording/production studio engineer course and January/February I'm going to finish live music/sound engineering course.
I plan to make a living out of this, so in a few months I'll be looking for some sound related job.
I work with Logic Studio 9 on my Mac and the LP is my only synth as you can see. In a few months I plan to release my first album
Moogs and Macs good for music
(@EricK - also putting hands against the screen helps a lot
Lately I finished an audio recording/production studio engineer course and January/February I'm going to finish live music/sound engineering course.
I plan to make a living out of this, so in a few months I'll be looking for some sound related job.
I work with Logic Studio 9 on my Mac and the LP is my only synth as you can see. In a few months I plan to release my first album

Moogs and Macs good for music

(@EricK - also putting hands against the screen helps a lot

I had a PC for the last 20 years (I'm 27) and 1,5 year ago I left the PC world and I'm really glad, cause I know all the bleep needed to solve most of S%$tdows problems, but on the Mac... I don't have to. It's all so straight-forward.
Today I had to set up my sisters' new Windows 7 PC and I'm sick of it. All the pop-up error windows and stuff. I'll never get back to PC. And since I work with Logic Studio there's not even a way to get back.
Today I had to set up my sisters' new Windows 7 PC and I'm sick of it. All the pop-up error windows and stuff. I'll never get back to PC. And since I work with Logic Studio there's not even a way to get back.
I sent the LP back to the factory, and Amos replaced the amber button lights with blue ones. I did the wheel lights myself, while e-mailing Amos for advice on how to best go about it. It's not cheap to get a Little Phatty to look like mine, but it's well worth it to me. Thanks for the nice comments!tyrannosaurus mark wrote:Voltor, WOAH! That particular wood looks perfect for the job! I need to dig up the part where you talk about how you swapped out all the lights, I like!!

Minitaur, CP-251, EHX #1 Echo, EHX Space Drums/Crash Pads, QSC GX-3, Pyramid stereo power amp, Miracle Pianos, Walking Stick ribbon controller, Synthutron.com, 1983 Hammond organ, dot com modular.
Same here!tyrannosaurus mark wrote:To be fair, I too have Moogs and macs and don't make a living out of music

Minitaur, CP-251, EHX #1 Echo, EHX Space Drums/Crash Pads, QSC GX-3, Pyramid stereo power amp, Miracle Pianos, Walking Stick ribbon controller, Synthutron.com, 1983 Hammond organ, dot com modular.
-
- Posts: 10
- Joined: Thu Nov 12, 2009 4:19 pm
-
- Posts: 10
- Joined: Thu Nov 12, 2009 4:19 pm
The room is fantastic. Its spacious, which you can tell from the pic. a three guitar stand with guitars, my microphone stand with sE reflexion filter and karma condenser, printer and printer stand, yamaha cs1x on a stand, and my micro korg xl on a double shelf bookcase all fit in there wih plenty of room to move around in. Plus a nice closet where I keep ALL my orig gear boxes...including the MPK88's box.
Auralex acoustic treatment goes up next week.
Auralex acoustic treatment goes up next week.
-
- Posts: 75
- Joined: Thu Dec 31, 2009 5:37 am
I don´t know how can I put the photos here. So I put a link to my photos in the first music forum in Spain.
http://www.hispasonic.com/comunidad/usuario71305.html[/url]
http://www.hispasonic.com/comunidad/usuario71305.html[/url]
LP STAGE - NORD LEAD 2X - ALESIS ION -MICROKORG REVERSE KEYS - ARTURIA ANALOG FACTORY EXPERIENCE - MFB 502 - RIBBON R2M - SMALL STONE - LEXICON MX200 - EDIROL M16DX -EDIROL M-10MX - EDIROL UM-3EX