Hey there people,
does anybody know where I can get a hard or soft case for my Voyager in the UK?
Cheers
Where can I get a case for my Voyager in the UK?
-
- Posts: 16
- Joined: Thu Aug 05, 2004 7:10 am
- Location: Kent, UK
-
- Posts: 684
- Joined: Sun Aug 03, 2003 12:16 am
- Location: Oxford, UK
Get one custom made by Flight Case Warehouse.
-
- Posts: 16
- Joined: Thu Aug 05, 2004 7:10 am
- Location: Kent, UK
-
- Posts: 684
- Joined: Sun Aug 03, 2003 12:16 am
- Location: Oxford, UK
Yeah I did. I just had a go actually, the basic sound isn't difficult to achieve, but I haven't yet got close. I'll give it another go next week.
Go to the init parameters, then set all the oscillators to '8 and square wave, You might have to fine tune the oscillator frequencies a bit. In the mixer section turn all the oscillators on and put the knobs somewhere between 8-10. Attack time at 10msec. Keyboard amount at 10, cutoff at 12k, and amount to filter at the 9:00 position.
The flightcases are pretty expensive. I've just bought one for my Prophet-5. It was over £150. But since the Voyager is a lot smaller, expect to pay less.
Go to the init parameters, then set all the oscillators to '8 and square wave, You might have to fine tune the oscillator frequencies a bit. In the mixer section turn all the oscillators on and put the knobs somewhere between 8-10. Attack time at 10msec. Keyboard amount at 10, cutoff at 12k, and amount to filter at the 9:00 position.
The flightcases are pretty expensive. I've just bought one for my Prophet-5. It was over £150. But since the Voyager is a lot smaller, expect to pay less.
-
- Posts: 16
- Joined: Thu Aug 05, 2004 7:10 am
- Location: Kent, UK
-
- Posts: 10
- Joined: Mon Jan 24, 2005 3:19 pm
- Location: UK
Flight Case for Voyager
Hi, I got the official SKB Flightcase from http://www.sonoms.de/ It only took 3 days to deliver from Germany, and comes complete with the Moog Logo Plate riveted on the front. I was really suprised at the quality, well fitted and rugged, with extendable handle and really rugged wheels with bearings. They also do the aluminium case and the gig bag. Shaun.