MIDI-to-CV

Bryan T · Post by **Bryan T** » Wed Apr 08, 2009 12:48 pm

What MIDI-to-CV interface do you use?

Thanks!

analoghaze · Post by **analoghaze** » Wed Apr 08, 2009 7:40 pm

I Use the Voyager.

I also use a Future Retro 777.

My MIDI is sent from a Clavia Nord Modular G2. (quite amazing...... endless possibilities)

It is great!

I have been thinking of getting the synthesizers.com converter. ( a little tight of funds right now though)

Bryan T · Post by **Bryan T** » Wed Apr 08, 2009 8:10 pm

I'm hoping there is a cheaper option out there.

jon_kull · Post by **jon_kull** » Wed Apr 08, 2009 8:25 pm

I use the Kenton Pro Solo Mk II with my Old School and the Kenton Pro 2000 Mk II with my modular.

http://www.noisebug.net/site/proaudio_m ... x.cfm?id=2

http://www.noisebug.net/site/proaudio_m ... x.cfm?id=1

Kevin Lightner · Post by **Kevin Lightner** » Wed Apr 08, 2009 8:51 pm

Kenton Pro Solo Mk II here too.

anaivemistake · Post by **anaivemistake** » Wed Apr 08, 2009 9:13 pm

I use a novation bass station rack. works pretty well. They as cheap as kenton prices and have a single oscilator synth as well. I see 'em now and again on ebay.

Raglani · Post by **Raglani** » Thu Apr 09, 2009 5:23 am

Try Doepfer. I have a little red box that works with everything I've tried it with.

Bryan T · Post by **Bryan T** » Thu Apr 09, 2009 3:13 pm

Raglani wrote:Try Doepfer. I have a little red box that works with everything I've tried it with.

I didn't see the 'little red box' on their site. Do you know if they still make it?

CTRLSHFT · Post by **CTRLSHFT** » Thu Apr 09, 2009 3:19 pm

I use a Future Retro XS.

Kenton stuff is probably the best bet if you're on a budget, even has an lfo built in.

Raglani · Post by **Raglani** » Thu Apr 09, 2009 8:22 pm

Seen a red one and a gray one. Has midi in and thru, CV 1/2 out, CV3/4 out and gate out. Not sure whats on they're site, mine came with my A-100. Seen other dudes using them tho.

Raglani · Post by **Raglani** » Thu Apr 09, 2009 8:24 pm

mine looks like this but red.

JohnLRice · Post by **JohnLRice** » Fri Apr 10, 2009 1:29 am

I have the Synth Tech MOTM-650:
https://www.synthtech.com/motm650.html

nicholas d. kent · Post by **nicholas d. kent** » Fri Apr 10, 2009 3:36 am

Doepfer MCV24
Kenton Pro 4
JLCooper MIDInterface io

hogberto · Post by **hogberto** » Mon Apr 13, 2009 7:31 am

Kenton Pro-2000.

solid as the proverbial Rock.

bunnyman · Post by **bunnyman** » Mon Apr 13, 2009 11:20 am

Is this part of a eurorack modular or a standalone? If part of a modular, try the Doepfer A-190 module. It's pretty neato: clock out, gate/CV, a second CV for filter mod, etc, built-in LFO and Glide (controllable by MIDI CCs). Otherwise, I'd go for the Doepfer standalone that's already recommended. Check out AnalogueHaven.com. They'll probably have something for you!

-andrew bunny