Tips and techniques for Minimoog Analog Synthesizers
-
tompisa
- Posts: 14
- Joined: Tue Jan 27, 2009 10:23 am
Post
by tompisa » Tue Jan 27, 2009 4:22 pm
I just purchased a nice OS and I am wondering what I could do with this Stereo Output ?
appreciate your feedback
tom
-
latigid on
- Posts: 1579
- Joined: Mon Jan 30, 2006 3:47 pm
- Location: Auckland, New Zealand
Post
by latigid on » Tue Jan 27, 2009 4:53 pm
Have you read the manual? When both outputs are used, the two filters go to one output each. The frequency difference is controlled by "Spacing".
Mono will still work (both filters routed to the left output) or you could run it through a stereo mixer.
Or patch the right output back into the external input for feedback effects.
Have fun!
-
tompisa
- Posts: 14
- Joined: Tue Jan 27, 2009 10:23 am
Post
by tompisa » Tue Jan 27, 2009 6:58 pm
Thank you . this is good advice.
-
Analog!
- Posts: 146
- Joined: Mon Jan 26, 2009 9:12 pm
Post
by Analog! » Tue Jan 27, 2009 6:58 pm
hey tompisa,
congrats on acquiring the os! how do you like it so far?
-
Brian G
- Posts: 605
- Joined: Sat Jul 19, 2003 11:04 pm
Post
by Brian G » Tue Jan 27, 2009 8:44 pm
Congrats. You can also put a "dummy plug" in the left output or turn it down on the mixer, and just use the right output. It will now only be using one filter and act almost like a Model D

.
-
acorkos
- Posts: 219
- Joined: Sun Nov 02, 2008 9:14 pm
- Location: Redondo Beach, CA
Post
by acorkos » Tue Jan 27, 2009 11:45 pm
another idea... L/R outputs into separate channels (or single stereo channel) on your mixer....add stereo delay, reverb, chorus and your headphones, lower the lights

-
Analog!
- Posts: 146
- Joined: Mon Jan 26, 2009 9:12 pm
Post
by Analog! » Wed Jan 28, 2009 1:05 am
that sounds like the way to go. i am going to be without any effects on arrival of my os, but i can see that being on the top of my wish list.
-
EricK
- Posts: 6015
- Joined: Fri Apr 09, 2004 2:09 pm
Post
by EricK » Wed Jan 28, 2009 1:41 am
You will want to get a TRS Cable so you can utilize the effects loop of the OS.
Congrats and welcome to the forum!
Eric
Support the Bob Moog Foundation:
https://moogfoundation.org/do-something-2/donate/
I think I hear the mothership coming.
-
tompisa
- Posts: 14
- Joined: Tue Jan 27, 2009 10:23 am
Post
by tompisa » Wed Jan 28, 2009 5:55 am
Hi,
yes, I would say.. I like the design, the sound and the simplicity of this instrument.
It´s like a good friend
-
david
- Posts: 55
- Joined: Wed Sep 22, 2004 8:50 pm
Post
by david » Wed Feb 04, 2009 1:32 pm
Try modulating the signals panning from one output to the other.
You can use the mod wheel, foot pedal, an envelope, lfo, keyboard, etc.
Best,
dml