Help getting started with MF-102

Plug in here for info tips and strategies for your Moogerfooger Analog Effects. Connect more than one for plenty of fun!
Post Reply
biggestriff666
Posts: 2
Joined: Tue Dec 26, 2006 11:14 pm

Help getting started with MF-102

Post by biggestriff666 » Tue Dec 26, 2006 11:16 pm

How do I get the drive to go yellow...it's just not lighting up at all.

I'm new to Moogerfoogers, so maybe I'm not doing something right?
Top
CTRLSHFT
Posts: 987
Joined: Mon Jun 06, 2005 2:24 pm
Location: boulder, co
Contact:
Contact CTRLSHFT

Re: Help getting started with MF-102

Post by CTRLSHFT » Wed Dec 27, 2006 12:02 am

biggestriff666 wrote:How do I get the drive to go yellow...it's just not lighting up at all.

I'm new to Moogerfoogers, so maybe I'm not doing something right?
if it's all red, and you have the drive knob all the way down, the level of the incoming signal is too hot. Try dropping the level from your instrument coming into the unit.

if it's all green, crank it up until you get a yellow/flickering red color.

hope that helps!
www.ctrlshft.com
Top
MarkM
Posts: 909
Joined: Wed Mar 30, 2005 5:28 pm
Location: Northeast Tennessee, USA

Post by MarkM » Wed Dec 27, 2006 12:36 am

Make sure you are sending it an audio signal. Any electric guitar or synth out shoud be able to make that light flicker. If not, try using different cables. I'm assuming you have the right power source for your MF.
Mark Mahoney
http://www.reverbnation.com/markmahoney
www.cdbaby.com/cd/mmahoneympeck
www.cdbaby.com/cd/markmahoney
Top
biggestriff666
Posts: 2
Joined: Tue Dec 26, 2006 11:14 pm

Post by biggestriff666 » Wed Dec 27, 2006 2:09 am

it's the power adaptor that came with the stomp box.

maybe it's a low output coming from my guitar? i tried it with a tele, maybe i'll try my les paul?

i should plug the guitar inti 'audio in' right?

i've gotten it to flickr green why the pedal has not been bypassed.
Top
alx002
Posts: 22
Joined: Mon Nov 22, 2004 8:51 pm

Post by alx002 » Thu Dec 28, 2006 1:12 pm

I've just received my new MF102.

A stupid question:

When the rate of the LFO is at MINI and Amount at MINI : the LFO ' light is RED fix...... when I turn the LFO 's Rate clockwise the FIxed red light began to oscillate.

Is it normal that the LFO Light is fixed on the RED even when the RATE is very Low?

:)

Thanks
Top
User avatar
GregAE
Posts: 1591
Joined: Mon Jul 21, 2003 8:44 pm
Location: In the studio, of course

Post by GregAE » Thu Dec 28, 2006 1:30 pm

alx002 wrote:I've just received my new MF102.

A stupid question:

When the rate of the LFO is at MINI and Amount at MINI : the LFO ' light is RED fix...... when I turn the LFO 's Rate clockwise the FIxed red light began to oscillate.

Is it normal that the LFO Light is fixed on the RED even when the RATE is very Low?

:)

Thanks
This seems perfectly normal. If you look closely at the LFO LED when you set the rate at, say 12 o'clock, you'll notice that the LED blinks (indicating the actual rate) but never goes completely off. This behavior, when combined with a very low RATE setting, gives the appearance of the LED never going off at all.

- G
Top
alx002
Posts: 22
Joined: Mon Nov 22, 2004 8:51 pm

Post by alx002 » Thu Dec 28, 2006 3:28 pm

Thanks for this fast answer :-)


8)


I Love MOOG !!!!
Top
DELETED

Post by DELETED » Mon Jan 08, 2007 7:31 pm

DELETED
Top
StereoH
Posts: 15
Joined: Tue Jan 09, 2007 12:41 pm
Location: PARIS

Post by StereoH » Tue Jan 09, 2007 12:43 pm

Abbunbur64 wrote:I'm shocked!

What does it meant ?

Shocked by this blinking behaviour ?
Voltage Controlled Dilettante
Top
Post Reply

Return to “Moogerfooger Forum”