Moog One FEATURE Requests
-
- Posts: 30
- Joined: Fri Aug 02, 2013 5:21 pm
Re: Moog One FEATURE Requests
Just Intonation.
Re: Moog One FEATURE Requests
Feature Request:
- Setting "Pan" per Oscillator
So we can spread a single voice with an osc left/center/right!
- Setting "Pan" per Oscillator
So we can spread a single voice with an osc left/center/right!
Re: Moog One FEATURE Requests
This would need twice the numbers of both filters, as the signal would have to pass through a left and right filter.
keep on turning these Moog knobs
Sequence:
Prodigy * minimoog '79 * Voyager * MF102 * MF103 * MF104z * MP201 * Taurus 3 * Minitaur * Sub Phatty * MF105 * Minimoog 2017+ MUSE * One 16
Sequence:
Prodigy * minimoog '79 * Voyager * MF102 * MF103 * MF104z * MP201 * Taurus 3 * Minitaur * Sub Phatty * MF105 * Minimoog 2017+ MUSE * One 16
Re: Moog One FEATURE Requests
The filter(s) can only process a mono signal then?
Setting panning per timbre/synth to just get a stereo spread is another limitation, specially since both the synth effects and pan spread/unison comba are so noisy :s
Re: Moog One FEATURE Requests
For a stereo filter you need to have two filters (in analog and digital domain). One for each channel. So this would add plenty of hardware.
keep on turning these Moog knobs
Sequence:
Prodigy * minimoog '79 * Voyager * MF102 * MF103 * MF104z * MP201 * Taurus 3 * Minitaur * Sub Phatty * MF105 * Minimoog 2017+ MUSE * One 16
Sequence:
Prodigy * minimoog '79 * Voyager * MF102 * MF103 * MF104z * MP201 * Taurus 3 * Minitaur * Sub Phatty * MF105 * Minimoog 2017+ MUSE * One 16
- AlakaLazlo
- Posts: 77
- Joined: Mon May 04, 2009 7:18 pm
- Location: Los Angeles, CA
- Contact:
Re: Moog One FEATURE Requests
If I had one wish for the One, it would be to increase the multitimbrel capability. I'll explain...
I am a much better guitar player than I am a keyboard player. I've been playing guitar synths since the 70s. In fact, my Moog Model IIP was primarily used as a guitar synth using a 360 Systems Slavedriver which did a single channel of guitar to CV/Trig.
Modern guitar to midi converters allow for various string/midi configurations. Generally, each of the strings can send midi to a single channel, or (in some cases) to individual channels (usually referred to as midi-mono mode); the latter being FAR superior for playability as each string's pitch bend and velocity affect only the synth/voice assigned to that string.
The One can receive 3 midi channels at a time and route them to a specified layer. If it could receive 6, voice/layers to individual midi channels, it would be the ideal guitar controlled synthesizer. My 16 voice could have multiple voices per string and would be a glorious addition to it's functionality.
Not sure if this is possible via a firmware update, and I'm sure this would be way down the list of future developments; but - hey - dare to dream....
I am a much better guitar player than I am a keyboard player. I've been playing guitar synths since the 70s. In fact, my Moog Model IIP was primarily used as a guitar synth using a 360 Systems Slavedriver which did a single channel of guitar to CV/Trig.
Modern guitar to midi converters allow for various string/midi configurations. Generally, each of the strings can send midi to a single channel, or (in some cases) to individual channels (usually referred to as midi-mono mode); the latter being FAR superior for playability as each string's pitch bend and velocity affect only the synth/voice assigned to that string.
The One can receive 3 midi channels at a time and route them to a specified layer. If it could receive 6, voice/layers to individual midi channels, it would be the ideal guitar controlled synthesizer. My 16 voice could have multiple voices per string and would be a glorious addition to it's functionality.
Not sure if this is possible via a firmware update, and I'm sure this would be way down the list of future developments; but - hey - dare to dream....
Moog IIP, One 16V and MiniMoog, DotCom/FSFX/Moon/STG 110, Cubase 12Pro, Ableton Live 10/64, RME UFX+, 2xMR816, MioXL, Expressionist, Cirklon, Analog Rytm Mk II, Axon AX50, Customized Variax JTV69s (the Hexstainocaster), Strat, Godin ACS Slim, Helix.
-
- Posts: 2
- Joined: Tue Mar 14, 2017 9:03 pm
Re: Moog One FEATURE Requests
49 keys, better keybed, no bugs
Better Price Tag
All the innovation and no skimping of details
Please keep same I/O and Mod Matrix.
Much Thanks from the general public // common people.
Better Price Tag
All the innovation and no skimping of details
Please keep same I/O and Mod Matrix.
Much Thanks from the general public // common people.
Owned: Moog Subsequent 37; KorgR3; DSI OB-6, Tempest; Yamaha Reface DX;&CP; Roland TB-3, VP-03
-
- Posts: 30
- Joined: Fri Aug 02, 2013 5:21 pm
Re: Moog One FEATURE Requests
To be more specific, the ability to set a custom microtuning for each of the 12 notes. I believe this feature was added to the Minitaur.
Re: Moog One FEATURE Requests
Love my 16-voice Moog One. Worth every penny.
After 6 months of owning one I'd love to have a companion app for Mac and iOS that would show you exactly what the settings are in real time. Would be better for understanding, creativity and visually for YouTube videos where I love to see the actual settings.
More CV in/out modulation options for use with mother eurorack.
Some more tutorials on how to get the best out of Moog One would be awesome!
Thank you
After 6 months of owning one I'd love to have a companion app for Mac and iOS that would show you exactly what the settings are in real time. Would be better for understanding, creativity and visually for YouTube videos where I love to see the actual settings.
More CV in/out modulation options for use with mother eurorack.
Some more tutorials on how to get the best out of Moog One would be awesome!
Thank you
Re: Moog One FEATURE Requests
Hi!
One improvement I would love (and have been dreaming since the start) would be to have the ability to switch ON/OFF the SYNTH1, SYNTH2 and SYNTH3 via midi.
Ideally via a midi foot pedal.
That would be totally unique and would allow uninterrupted left hand playing while one of the 2 superimposed chords of the right hand could be frozen and allow the right hand to solo over it.
Unfortunately today, if I’m not wrong, the ON/OFFs of SYNTH1, SYNTH2 and SYNTH3 do not have any Midi CC
Hope this is feasible
To me I would even favor this over FX modulation even though that would open tremendous sound design possibilities
And, yes, a tiny one too: the ability to modulate Pan Spread
Cheers!
V
One improvement I would love (and have been dreaming since the start) would be to have the ability to switch ON/OFF the SYNTH1, SYNTH2 and SYNTH3 via midi.
Ideally via a midi foot pedal.
That would be totally unique and would allow uninterrupted left hand playing while one of the 2 superimposed chords of the right hand could be frozen and allow the right hand to solo over it.
Unfortunately today, if I’m not wrong, the ON/OFFs of SYNTH1, SYNTH2 and SYNTH3 do not have any Midi CC
Hope this is feasible
To me I would even favor this over FX modulation even though that would open tremendous sound design possibilities
And, yes, a tiny one too: the ability to modulate Pan Spread
Cheers!
V
Re: Moog One FEATURE Requests
Maybe I wasn’t precise enough in my previous post: when I say the ON/OFF of SYNTH1, SYNTH2 and SYNTH3 I mean the “KEYBOARD CONTROL” ON/OFF for each of the 3 synths
Cheers!
Cheers!
Re: Moog One FEATURE Requests
Following a discussion on Gearslutz I realize my request is still not well formulated.
The idea is not to mute one of the 3 Synths but to turn off its “keyboard control”, so that, if that synth is in Latch mode or on a long sustain patch, it remains impervious to new notes the same hand would do when starting soloing over it.
That way you “freeze” the chord under the solo, for the same hand.
And using a midi foot switch would allow the left hand to keep on playing bass without being interrupted by pressing the “ON/OFF” KEYBOARD CONTROL button as it is the case today.
Performance wise this would be unique and quite a game changer for me
The idea is not to mute one of the 3 Synths but to turn off its “keyboard control”, so that, if that synth is in Latch mode or on a long sustain patch, it remains impervious to new notes the same hand would do when starting soloing over it.
That way you “freeze” the chord under the solo, for the same hand.
And using a midi foot switch would allow the left hand to keep on playing bass without being interrupted by pressing the “ON/OFF” KEYBOARD CONTROL button as it is the case today.
Performance wise this would be unique and quite a game changer for me
Re: Moog One FEATURE Requests
Another feature that would greatly help would be to have “S” curve shapes on the envelope, next to log, linear and exponential.
I used it extensively on the Andromeda.
Especially for Decay: it brings a smoother “landing” at the end of a Log curve typically.
Cheers!
I used it extensively on the Andromeda.
Especially for Decay: it brings a smoother “landing” at the end of a Log curve typically.
Cheers!
Re: Moog One FEATURE Requests
You can bend and modify (S curve) the various envelope curves by applying the output of the envelope generator (both positive and negative) to the various envelope generator segment controls (attack, decay, etc.).
Visit my synthblog...Moogs and more!
Www.synthguy.com
Www.synthguy.com
-
- Posts: 30
- Joined: Fri Aug 02, 2013 5:21 pm
Re: Moog One FEATURE Requests
Oh, I see Amos is talking about adding microtonal scales/custom tuning in this Oct 2018 video:
https://youtu.be/49vHK_D5-gA?t=2368
Has anyone heard anything more about this happening?
https://youtu.be/49vHK_D5-gA?t=2368
Has anyone heard anything more about this happening?