multiple fooger setup

Plug in here for info tips and strategies for your Moogerfooger Analog Effects. Connect more than one for plenty of fun!
Post Reply
lg
Posts: 48
Joined: Fri Mar 17, 2006 2:11 pm
Location: Venice, CA

multiple fooger setup

Post by lg » Fri Mar 17, 2006 2:30 pm

first post here: just ordered a cp-251 (to augment an mf 101, 102 & 105). curious if anyone out there cares to share some tips for integrating these units- favorite patches, tricks?
thanks!

User avatar
analoghaze
Posts: 527
Joined: Wed Nov 02, 2005 9:31 pm
Location: analog paradise
Contact:

Post by analoghaze » Sat Mar 18, 2006 2:27 pm

Spend a few evening just experminting.
The equiment will speak forr itself.
Truely amazing.


try this though. (it is hard for me to write this perfect)

S+H output on 251 into the frequency in on the RM
Carrier output on 251 into the LPF.
LPF into MuRF.


You are using the carrier frequency as audio.
Music can Name the Unnamable and Communicate the Unknowable.

'I am... everything is... changed... they're calling... your face... interwoven... who is...' Patient mumbles inaudibly to a tune (sounds like 'Thanks for the memory).

lg
Posts: 48
Joined: Fri Mar 17, 2006 2:11 pm
Location: Venice, CA

Post by lg » Sun Mar 19, 2006 10:01 am

AH,

thanks for this. you're right, of course. experimentation is the key. anxious for my 251 to arrive to try out that patch, and work out our own variations, of course. curious if anyone keeps notes of what they do (i'm thinking, after years of goofing around with analog, non-memory gear, it might be a good thing to try for a change- just a simple notepad...sounds geeky, i know. actually did that for a performance recently, though- helped with setup at least, without taking away from the spontaneity).

Post Reply