Voyager OS Release Time Issue

Tips and techniques for Minimoog Analog Synthesizers
Post Reply
droid72
Posts: 5
Joined: Sat Jun 20, 2009 3:29 pm
Location: Ohio

Voyager OS Release Time Issue

Post by droid72 » Sun Jun 01, 2014 5:46 pm

Hello, all.

Out of the blue, the release times on my Voyager OS have shrunk to mere milliseconds, even with the filter and volume release knobs cranked to maximum.

The release switch still has a minute effect when switched on and off, but no matter what I try, the maximum release time I can get is about 50 ms or so.

The strange thing is the night before this happened, the release times were functioning normally. I had a sound dialed in for recording that had a very long tail.

Anyone have any ideas or experience this on their Voyagers?

Thank you in advance.
Last edited by droid72 on Mon Jun 02, 2014 3:37 pm, edited 1 time in total.

User avatar
thealien666
Posts: 2791
Joined: Mon Nov 14, 2011 8:42 pm
Location: Quebec, Canada

Re: Voyager OS Release Time Issue

Post by thealien666 » Sun Jun 01, 2014 6:04 pm

Most probably something defective on the analog board. I would strongly suggest contacting Moog customer service ASAP.
Good luck.
Moog Minimoog D (1975)
DSI OB6
DSI Prophet REV2
Oberheim Matrix-6
Ensoniq SQ-80
Korg DW8000
Behringer DeepMind 12
Alesis Ion

droid72
Posts: 5
Joined: Sat Jun 20, 2009 3:29 pm
Location: Ohio

Re: Voyager OS Release Time Issue

Post by droid72 » Sun Jun 01, 2014 6:08 pm

thealien666 wrote:Most probably something defective on the analog board. I would strongly suggest contacting Moog customer service ASAP.
Good luck.
Roger that. Thank you.

Post Reply