Taurus malfunction HELP!!

[Marcos_epm]

Hi guys

I have a taurus III bass pedal.

Always worked flawlessly, however, it started producing some oscillation in almost all my patches.

I dont know if I pressed some wrong buttom or if its a malfunction.

Midi triggering is fine

What I have done already:

Replaced the power chord
Switched power outlets
Used different DIs
Tried Hi z and Low z outputs
Tried different cables
Did a master reboot
Return to original factory settings

Please take a look at the links below. I shooted 2 different effects with the problem.

http://youtu.be/w07DiD0umzk

http://youtu.be/NeB7vea_VbE

Please help!!!

Best

Marcos Freire

[Marcos_epm]

Anybody?? Any help would be appreciated...

Thanks

Marcos

[/u]

[sunny pedaal]

sure you don't have the resonance cracked up to max?
might be in the patch or that the velocity to resonance is set high.
did you already restore the os -software ?

[Amos]

sounds like the tuning, mate - have you tried a note calibration? if not, do that

[Marcos_epm]

Hi guys, many thanks for your insights.

I'll work on it tonight and let you know.

Best

[Marcos_epm]

Hi, problem solved!!! Thank you Amos!

After calibrating notes, everything got back to normal, except for the effect showed in the second video. In this case, I just had to adjust the B freq of the oscilator.

I was using my T3 to control Apple's mainstage via MIDI. MS was working accidentally out of tune (470 hz). Is it possible that MS got my T3 out of tune?

Best

Marcos

[factorplayer]

+1 calibration