How Do I make This Preset Dive Straight Down?

Dave008 · Post by **Dave008** » Thu Oct 13, 2005 12:22 am

Hi, i have this preset i kinda tweaked in the moog and its a sound that dives from the top down and then it rises back up.

Im trying to figure out how i make the sound just dive straight down the at the same length as it takes to dive down and up.

If anybody can please help me i've tried tweakin and i cant figure it out and i dont wanna ruin this sound.

Thx.

GregAE · Post by **GregAE** » Thu Oct 13, 2005 8:00 am

It sounds like you've got an inverted envelope programmed to affect the pitch. The pitch going 'down and up' is the result of the inverted attack and decay segments of the envelope. Try adjusting the Decay parameter to 0 and increase Sustain to 255. This will make the pitch dive down and stay down.

You will still have an issue with the envelope Release parameter bringing the pitch back up when you release the key. You'll have to experiment with this control to get the sound where you want it.

Another thought: why not program the Pitch Wheel for maximum bend (+/- 2 Octaves +5th) and do the dive bomb manually?

- Greg

OysterRock · Post by **OysterRock** » Thu Oct 13, 2005 10:53 am

You could also turn the GLIDE up and hold down notes on opposite sides of the keyboard. First a high note, then a low note, then a high note again.

Dave008 · Post by **Dave008** » Thu Oct 13, 2005 2:51 pm

Whatever i try to do this sound keeps going down then back up. It goes down in a certain sound then comes back up im a bit of a different sound.

I just want it to dive down all in the same sound and length.

I have the rackmount version. when i do it on the pitchbend wheel it still goes back up.

Can anybody help me out?Thanks!

Dave008 · Post by **Dave008** » Thu Oct 13, 2005 4:24 pm

Hey guys,

okay i got the preset to dive staight down but it got shorter.

How do i make it dive down slower and longer?

Thanks!

Dave008 · Post by **Dave008** » Thu Oct 13, 2005 7:57 pm

anybody?

falseface11 · Post by **falseface11** » Sun Oct 30, 2005 2:34 pm

one way to acheive this affect is to have the following item and with some tweeking it will work.

1) separate cv envelope generator.

patch the keyboard gate to the gate in on the cv envelope and its main out to the pitch cv in. set the attack to its shortest setting and the rest to your needs.

hope this helps

$$

MarkM · Post by **MarkM** » Sun Oct 30, 2005 3:19 pm

I tried using the filter envelope as the modulator. By having a very long decay and setting the sustain to 0 I was able to have a very long dive which didn't come back up. The Attack level will also dictate if the pitch will rise and then go down or just start to dive. You'll have to tweak that as well.