104z-104sd minimum delay time Q

kb · Post by kb » Wed Sep 21, 2005 12:28 pm

So far, the only concern that I have noticed, in relation to the new 104s, is the difference in the shortest delay times.

I understand that the longer delay time is desireable for many reasons.

But, does the difference between the minimum of 40 milliseconds (z) and 50 milliseconds (sd) really matter?

sir_dss · Post by **sir_dss** » Wed Sep 21, 2005 11:59 pm

A shorter delay will yeild flange, reverb, slap-back and chorus effects.

I guess that is why people make a big deal out of the shoter delay times/

basssfx · Post by **basssfx** » Mon Sep 26, 2005 4:09 pm

Remember that some CV inputs can take negative volatages. I don't know if this is the case with the time jack on the SD, but if so, you could get slower/faster times.

I did ask moog directly in the past; any negative volatage recieved by an input which only accepts say, 0-5V, will take the negative voltage as zero.

basssfx · Post by **basssfx** » Mon Sep 26, 2005 4:10 pm

voltage*

peter ripa · Post by **peter ripa** » Sat Oct 01, 2005 1:13 am

sadly you cant force the original 104 into flange range, doubt you can do this with the new

kb · Post by kb » Mon Oct 03, 2005 11:21 am

Sadly for sure.

Thanks Peter for letting me know b4 my 104z showed up. Now I won't waste time getting frustrated trying something that is not possible.

I checked, and it seems that Flanging needs 1-10ms of delay to work.

Hey Moog what's the deal? I guess there must be a trade off somewhere.

Why is the 104 limited in this manner? (50ms)

Moog Music Forum

104z-104sd minimum delay time Q

104z-104sd minimum delay time Q

Negative voltage