August 2005 Patches

Tips and techniques for Minimoog Analog Synthesizers
Post Reply
LWG
Posts: 282
Joined: Tue May 25, 2004 1:27 am
Location: New Jersey

August 2005 Patches

Post by LWG » Thu Aug 04, 2005 12:40 am

EML-101 Filt-a-scape: Patch simulates an EML-101 thru dampened delay.
Adjust Osc 3 freq so rate of repeats in highest octave
of kbd is about 3.3khz or less. Add reverb to taste.

Oscillators:

Octave: Osc1 - 8', Osc2 - 8', Osc3 - 4'

Wave: Osc 1 - 9 (250), Osc2 - 9 (250), Osc3 - 7.9 (218)

Frequency: Osc 1 - n/a, Osc2 - +4 (+86), Osc3 - 0 (-1)

Mixer:

Level: Osc1 - 9 (241) ON, Osc2 - 8 (213) ON, Osc3 - 6.8 (181) ON

Noise - OFF, External - OFF

Filter:

Frequency: 8kHz (242), spacing: +1 (+55), Resonance: 3.9 (093),

KB Amount: 3.3 (076), Mode: HP/LP, Cutoff Slope A/B: 12db/12db,

Envelope Amount: -1 (-29).

Filter Envelope:

Attack: 12mS (059), Decay: 4 Sec (217), Sustain: 0, Release: 5 Sec (227).

Amplitude Envelope:

Attack: 13mS (061), Decay: 0mS, Sustain: 8.8 (229), Release: 1 Sec (199)

Env Gate: KB.

LFO:

Rate: 4.5 Hz (180), Lfo Sync: Off

Wheel Mod Bus: Source-Square, Destination-Pitch, Shaping:On/Pgm,

Amount: 2 (028)

Pedal Mod Bus: Source-Osc3, Destination-Filter, Shaping: On/Pgm,

Amount 5 (129).

Glide: Off, Release: On, Pitch Bend Amt: +/- minor third

1>2 Sync: Off, 3>1 FM: Off, Osc3 Kbd Ctrl: On, Osc3 Freq: Hi,

KB Mode: Low-note priority, KB Trigger: Multiple.

Master Volume: 6.2

Output config: Mono output/ No plug in B output.

Optional: Small bit of compression (tube or optical) to tame amplitude variations a bit. Reverb.


Regards,


LWG

User avatar
Lengai
Posts: 432
Joined: Mon Jul 12, 2004 6:22 pm
Location: Los Angeles, CA

Post by Lengai » Thu Aug 04, 2005 6:08 pm

LWG,

Thanks again! Now I have something to look forward to tonight. I wish more patches were posted here for everyone to share. If I come up with something interesting, I'll post it.

User avatar
GregAE
Posts: 1591
Joined: Mon Jul 21, 2003 8:44 pm
Location: In the studio, of course

Post by GregAE » Fri Aug 05, 2005 6:53 pm

What is needed is for Moog Music to give us some file space here to post our sounds. No idea how many would contribute (I would!), but until space is provided, the only recourse is either to post a list of parameter values (like LWG) or post your patches on another site.

One possibility is the Voyager Yahoo forum:

http://launch.groups.yahoo.com/group/mmvoyager/

That forum isn't very active anymore (seems that everyone is here), but could still be used for exchanging patches.

Post Reply