Search found 77 matches

by Quatschmacher
Sun May 24, 2020 7:12 pm
Forum: Subsequent 37 & Subsequent 25
Topic: Subsequent 25 midi question
Replies: 6
Views: 553

Re: Subsequent 25 midi question

I’d suggest using something like a Morningstar MC6 to connect the three instruments. You can set up a single button to scroll PC numbers on multiple midi channels and within specified upper and lower values independently for each channel. You could probably even program it such that changing patches...
by Quatschmacher
Sat Mar 28, 2020 10:06 pm
Forum: Subsequent 37 & Subsequent 25
Topic: LFO FM
Replies: 1
Views: 222

Re: LFO FM

Set mod buss 2’s source as filter EG and then press and hold buss 2’s destination button and turn mod buss 1’s pitch knob. This will assign buss 2’s assignable destination to buss 1’s pitch amount. Now use buss 2’s assignable knob to dial in the amount of filter EG signal controlling the pitch knob ...
by Quatschmacher
Tue Jan 14, 2020 7:35 am
Forum: Taurus, Minitaur & Sirin
Topic: Minitaur with full interface and display for patch number
Replies: 6
Views: 766

Re: Minitaur with full interface and display for patch number

You could get something like a Morningstar MC6 and use it to scroll presets; you can set it to display the current patch number. You could also use MIDI CCs programmed to the other hardware buttons and/or expression pedal to gain easy access to the Minitaur’s under-the-hood features without having t...
by Quatschmacher
Thu Jun 13, 2019 8:30 am
Forum: Taurus, Minitaur & Sirin
Topic: Minitaur still triggers above note range
Replies: 1
Views: 1839

Re: Minitaur still triggers above note range

There is another mode (wrap off) where it’ll just play the highest note in its range once you stray out of it. Still, an option for complete silence would’ve been useful.
by Quatschmacher
Tue Jun 04, 2019 10:28 am
Forum: Subsequent 37 & Subsequent 25
Topic: Subsequent 37: Assign Aftertouch to Filter
Replies: 6
Views: 2726

Re: Subsequent 37: Assign Aftertouch to Filter

Couldn’t you also use source “pressure” and destination “filter”?
by Quatschmacher
Wed May 08, 2019 11:16 am
Forum: Subsequent 37 & Subsequent 25
Topic: Really Disappointed with Moog Quality Assurance
Replies: 10
Views: 5505

Re: Really Disappointed with Moog Quality Assurance

I would guess shipping too. I sent my Subsequent in to get the oscillator outputs balances and it came back with the box all bashed up and loose knobs. Sent it back again and it came back with one pot not working at all. Sent it back a third time making sure to reinforce all the packaging (internal ...
by Quatschmacher
Fri Feb 01, 2019 9:20 am
Forum: Taurus, Minitaur & Sirin
Topic: Sirin and Minitaur
Replies: 4
Views: 5696

Re: Sirin and Minitaur

I’m also interested to hear if there are differences in the bass registers.
by Quatschmacher
Wed Jan 30, 2019 7:27 pm
Forum: Subsequent 37 & Subsequent 25
Topic: controlling Sub37 by MIDI (cc2 espoecially)
Replies: 1
Views: 1828

Re: controlling Sub37 by MIDI (cc2 espoecially)

Maybe use one mod buss as follows: Source: constant on Destination: VCA Set a positive amount on the Mod 1 amount knob (programmable destination). Then in the controllers menu for that buss, set breath control to 100% You’ll probably need to set a relatively low sustain level on the amp envelope too...
by Quatschmacher
Wed Jan 16, 2019 3:46 pm
Forum: Moog Music General Topics Forum
Topic: SWITCHED ON MOOG - ANIMATED VR FILM
Replies: 1
Views: 1863

Re: SWITCHED ON MOOG - ANIMATED VR FILM

Have you been in touch with Will Gregory? If not, I strongly urge that you do so. His group does live performances of the Bach material all on synths.

http://www.willgregorymoogensemble.co.uk
by Quatschmacher
Sun Dec 23, 2018 5:30 am
Forum: Minimoog Forum
Topic: New Model D Reissue Pitch Bend Center (Precision)
Replies: 26
Views: 14887

Re: New Model D Reissue Pitch Bend Center (Precision)

How easy or difficult would it be to mod the Model D with the pitch wheel from the Grandmother (which is sprung)?
by Quatschmacher
Mon Dec 10, 2018 9:26 am
Forum: Subsequent 37 & Subsequent 25
Topic: Moog Sub 37 interfering with the Minitaur MIDI
Replies: 3
Views: 2184

Re: Moog Sub 37 interfering with the Minitaur MIDI

Are both units using the same MIDI channel? That could be a possible cause.
by Quatschmacher
Mon Dec 10, 2018 3:42 am
Forum: Subsequent 37 & Subsequent 25
Topic: Low output of Subsequent 37 sub oscillator?
Replies: 0
Views: 1255

Low output of Subsequent 37 sub oscillator?

I’ve noticed that the output of my sub oscillator is lower than the equivalent square waves on oscillators 1 and 2. 10 on the sub oscillator is about the same level as 7 on the main oscillators; is this normal or should they all be capable of the same output?
by Quatschmacher
Thu Nov 01, 2018 6:11 pm
Forum: Moog One
Topic: Moog One Answers
Replies: 63
Views: 12392

Re: Moog One Answers

Frequency modulation (FM) I’m not sure I understand this parameter in an analogue synth. To me it’s about running another high frequency against your other oscillators. Which creates strobing audio effects like ring mod and cross mod. But on the other hand I know that DX7 were “fm” synths with “ope...
by Quatschmacher
Thu Nov 01, 2018 3:49 pm
Forum: Moog One
Topic: Moog One FEATURE Requests
Replies: 182
Views: 34830

Re: Moog One FEATURE Requests

I’d like to see the option to have the octave transpose buttons be either instantaneous (as they currently are) or to only transpose upon playing the next note (or releasing the previous note).
by Quatschmacher
Wed Oct 31, 2018 11:47 am
Forum: Moog One
Topic: Moog One FEATURE Requests
Replies: 182
Views: 34830

Re: Moog One FEATURE Requests

I’d like to see the option of having multiple FM paths be simultaneously active. The button control for engaging more than one path could be implemented in the same as selecting multiple synths - by holding down the first button and pressing the other(s) that one wants to engage.