Moog Music Forum

hmm this guy seems to have a similar problem

viewtopic.php?f=19&t=33793

this may not apply: but I had some weird behaviour like that, when I wasn't using the GM's power button to turn it on/off I had everything plugged into a power bar and used the powerbar to turn on/off a bunch of stuff you could try powercycling the Grandmother, using it's switch? I assume the CPU in...

yeah, that is a bizarre post! I normally go Direct thru my interface, into Reaper on my DAW if recording Voyager in stereo I use a rackmount Sony DPS D7 delay unit, which I like a lot mono is usually a Fulltone Tube Tape Echo, or Roland SDE 3000. which is cool, as it has modulation I want to try mik...

Analog Prophet, curious: what was the recording? was it Joe Zawinul?

or maybe Herbie?

hmm is it the same as what this fellow is experiencing?

viewtopic.php?f=2&t=33716

yes: Voyager, Voyager XL, Voyager RME all have the same sound engine, and can share patches between them the XL basically has the VX351/2 and CP351 built in, plus some other stuff if I were trying to emulate an MS20, I would start watching MS20 tutorials and then apply the same techniques to the Moo...

if you experiment you will surely discover something check this https://www.youtube.com/watch?v=3k5I5DXEG6g That guy has the ordinary Voyager, not the Voyager XL, so he cannot make the XL sounds I´m asking for. Yet again, I´m talking about taking advantage of the XL into a direction that the ordina...

if you experiment you will surely discover something

check this

https://www.youtube.com/watch?v=3k5I5DXEG6g

I have never tried to emulate an MS20, but have you tried changing the filter poles to 1 or 2, instead of 4? you can also get some rude sounds by patching/modulating at audio rate, various things by LFO1 & LFO2 there was a guy on youtube who did some interesting stuff with an XL. I think he patched ...

FWIW I had better luck using midi OX instead of sysex librarian, it's also free did you do this? ( copied from another thread ) The update file order is: 1) go to the MASTER page "Receive Update" and send bank "B". 2) then if the Voyager asks for bank "D" leave "NO" and press ENTER. 3) in the MASTER...

wow, what a setup!!

sounds great!!

thx for posting

I removed the pitchwheel nut on my reissue, just like Till's picture up above, and it's perfect now

be very careful when you pull it apart, as the aftertouch ribbon is in there & delicate

wow that sounds pretty cool!!

you could try Vimeo? or Instagram?

or via Google drive maybe

also curious what you needed to repair, to get them all working together?

thx!

not sure if this helps, but: I was just running my GM arp synced to my DAW the other day, what I discovered is you can't leave the "hold" button on the arp while starting/stopping your DAW play/record So I would first start the DAW running, then hit green "play" button on GM, and clock would always ...

I agree, fascinating stuff!!

thx for posting