Moog Music Forum

Yes, the mod map you set up only doubles the frequency of the Mod Oscillator. However, to get a further range you can set the "function source" to scale. The scale value will double the frequency (one octave) at about 14.34, at about 100.00 the frequency should go up about 7 octaves. To get an even ...

Not necessarily the same issue. But if I have the shift/hold button on, other knobs and the lefthand encoder don't seem to function. For me having the shift/hold button flash would be helpful. I've done this quite a few times and it still gets me.

I just want to update my previous post since V1.4 has come out with Global LFOs (and ENVs). These can be routed to CV outs and the GLFOs can run at audio rates. Although, as the frequency gets higher the bit solution starts to decrease and jitter increases. Not unexpected to me, still nice to have ...

Some nice improvements in v1.4 I appreciate.
Global LFOs 1 and 2 and global ENVs 1 and 2--nice to modulate the delays and can be sent to CV outs.
It is helpful to me, when trying to setup a mod matrix slot, to view my oscilloscope since I don't understand some of the
mod functional behaviors ...

"TUNING/AUTOCAL proceedures are unlocked by holding the outer soft buttons while in the TUNING
menu."

There are 4 buttons just under the Programmer display, these are the soft buttons.

I'm using a ProLine PXP10 Universal Expression Pedal with Polarity Switch and Minimum Depth Knob
and a ProLine PSS10 Universal Metal Sustain Pedal with Polarity Switch.
After looking on the web at many expression pedals, and reading reviews, I became skeptical about the honesty of reviews. So I ...

I tested this and global and per voice LFO 1 worked as expected. I may suggest when in per voice mode to enable the keyboard reset on LFO 1, at least initially.

Your mod matrix seems correct, assuming the destination amount is say 100% and the slot is not muted.
Only other thing to effect cv outputs is that under midi menu is the local keyboard, it should be ON.
I verified my gate out outputs 5volts when a key is depressed, and that the keyboard output a ...

Sorry about the formatting, forum doesn't seem to allow to add a .txt file.

I've been having more tuning issues now that the season is cooling.
Perhaps Moog could provide some guidance on how to tune the muse or
expectations tuning accuracy, or a better "Start Tuning" and "Quick Tune" functions ...

I would like if the ADSR release stage could be longer than 10 seconds--30 would be great.

I would like if the ADSR release stage could be longer than 10 seconds--30 would be great.

1. A quantize function in the mod matrix.
2. Be able to use the "value" encoder for fine/ultra fine tuning, the shift/fine tune feature is not well implemented.
3. Custom LFO wave shape as short of a pule as possible.
4. For OSCs 1 and 2 in more add Cents offset and sub-cents offset with encoder ...

On my muse this is working. Plugged and external LFO into muse CV in 1. Be sure your cable has 2 wires, a ground and voltage. In Mod slot source set to CV in 1 and destination is OSC 1 pitch at 100%. I believe the muse input voltage spec is -5v to +5v.
You could also test on the muse by itself by ...

Definitely need a global tuning option. Access via menu screen, or a more button. Allow user to offset, using encoder button, semitones and cents. Also display audio oscillators current offsets.

A walnut minimoog model D is being advertised by SweetWater music.
https://www.sweetwater.com/store/detail/MinimoogDWal--moog-minimoog-model-d-analog-synthesizer-walnut-limited-edition
Notice that the 2 pictures do not match--they are of different machines.

Surprisingly this option is not on ...