Moog Music Forum

Hi guys, after having a drifty Voyager for a while I discovered the pitch wheel calbration was not centered. I followed the instructions about changing the small trim pots inside, and noticed my mod wheel was a little loose side to side. I took out the box and tightened the nut holding the internal ...

Sure enough, that did it. Thanks for the tip. I opened her up and made sure some things were solidly held.
The phaser is off and on with the bypass problem. The light will change from green to red, but the signal is not bypassed, its unchanged from the phaser being on. It seems to fix sometimes if ...

I' ve been enjoying my Moog 104z delay for a while now, and its always behaved well. For the last week, i cant get it to keep up the feedback to where it starts looping. It used to do this easily after passing about 8 on the Feedback knob, but now its acting like 10 (the max) is at about 4. I've put ...

Finally got my used vx351 working. With the output adaptor installed and a second dcb cable, it finally started behaving as it should. Thank goodness. In regards to the hole in the back, I was recently informed that it is used to power the cp-251 when there both rackmounted. A wire is supplied with ...

Well i got and installed the output adaptor, and with the DCB cable plugged into the moog, it seems to "pinch" some sounds or close the filter a bit? and on some other patches it turns soaring leads n basses into a light clicking sound (to which there is no cure). As soon as i unplug the DCB, the ...

Hi glyph/amos, i tested the triangle LFO out to voyagers volume, and nothing, it turns it way down, just like having a plain TRS cable in that slot does. I checked the voyagers accessory port ribbon cable and its secure on both ends. I had read that it should still be doing something without the ...

So yes i know, i know, thats what i get for buying one used, but hopefully someone has some clues. My vx-351 appears not to be working, i read in the vx-351 appendix instructions in the back of the voyager manual, it mentions that an output adaptor has to be installed first. Should the vx-351 work ...

"We do not make a product for this now. However, Voodo Labs makes a multi-pedal supply that has worked well for our customers. Make sure the polarity is tip-positive on the leads. Ryan - Tech Support Manager"
The people at mesa-boogie told me this would not work, but Moog says it will. Hopefully it ...

Does anyone have any suggestions for powering multiple foogers? This maze of wall warts is ridiculous. I looked at the DC Power Brick by Dunlop and the Voodoo Labs power box, both decent multipower boxes. Neither has enough amperage to keep the power up after you have switched the polarity with ...

HI folks, just got a used Cp-251, with the white rings. Ive been fiddling with it today and it seems the plain S/H out1 doesnt go as wide as the on on my Voyager, or the CP-251 s/h used in the moog demo with brian kenew, even when hooked up simply. Has anyone else had problems with the S/H?