Search found 18 matches

by xgsjx
Fri Nov 04, 2011 3:09 am
Forum: Moogerfooger Forum
Topic: Audio into Murf Step?
Replies: 2
Views: 721

Re: Audio into Murf Step?

I split the signal using the direct out from a Boss OC3 & hooking it to the step adaptor - Nowt.
I tried boosting it - Still nowt.

Clicky pedal back into adaptor it is then.
by xgsjx
Wed Oct 26, 2011 5:00 am
Forum: Moogerfooger Forum
Topic: Audio into Murf Step?
Replies: 2
Views: 721

Audio into Murf Step?

If I split the signal coming from my bass & put one signal as normal through my FX chain & took the other signal & put it into the tap/step on the Bass Murf & used a step adaptor, would the signal control the step (can boost it if needed)?
by xgsjx
Mon Oct 24, 2011 3:29 pm
Forum: Controllers Forum
Topic: MuRF step adaptor
Replies: 7
Views: 5306

Re: MuRF step adaptor

A wee update for you. The cable from the LPF to the Bass Murf works well if you have a hot signal into the LPF & the Murf after it. It would be good to split my signal & have a signal into a booster (such as a cheapo distortion) & then into the Murf's step. I also made a step adaptor using a mono ja...
by xgsjx
Mon Oct 24, 2011 3:23 pm
Forum: Controllers Forum
Topic: EP-2 replacement string?
Replies: 4
Views: 1429

Re: EP-2 replacement string?

Cheers buddy. I'll see if I can find somewhere here that sells it. Infact, I'm gonna order some online just now.

EMwhite, whip the back off your EP-2 & have a look. It's a fairly simple layout inside.
by xgsjx
Fri Oct 14, 2011 1:02 pm
Forum: Controllers Forum
Topic: EP-2 replacement string?
Replies: 4
Views: 1429

EP-2 replacement string?

Hey guys, I was mid song last night & the string in my EP-2 snapped (about an inch from the toe end of the pedal). I quickly whipped the backplate off & unwound it once from the pot & threaded the string back on & tied it & all plays well again. Thankfully, it was only rehearsal. However, I could do...
by xgsjx
Mon Jun 20, 2011 8:57 am
Forum: Controllers Forum
Topic: MuRF step adaptor
Replies: 7
Views: 5306

Re: MuRF step adaptor

I've just answered my own Q.

I made the said cable up & tried it. The MF-101 needs to be before the murf for it to work & each note changes 1 step.
Good if you want to take advantage of the envelope on the resonance filters for either staccato or reverse sounding notes.

Gonna play some more later.
by xgsjx
Mon Jun 20, 2011 7:27 am
Forum: Controllers Forum
Topic: MuRF step adaptor
Replies: 7
Views: 5306

Re: MuRF step adaptor

Looking at the diagram, if I made a TRS lead that used a 2 core cable & connected one end to a jack TS & the other jack TR, put the TS end into the env out on a MF-101 & the TR into the tap tempo/pattern step on the murf, would this make the murf run through the pattern as the note was played (proba...
by xgsjx
Fri Apr 08, 2011 5:44 pm
Forum: Moogerfooger Forum
Topic: Splitting a CV signal
Replies: 6
Views: 2899

Re: Splitting a CV signal

Cheers for the prompt replies folks, much appreciated. I've been googling things like "how to make a CV multiplier" and "experimenter's box" but not had much luck on the search front as yet (I've not long started looking tho). I can solder & have no probs making simple things (actually been looking ...
by xgsjx
Thu Apr 07, 2011 3:06 am
Forum: Moogerfooger Forum
Topic: Splitting a CV signal
Replies: 6
Views: 2899

Splitting a CV signal

Hi folks,

Does anyone know if it's possible to split a CV signal with something as simple as a TRS Y lead or would I need something like the CP251?

My ideas are to either split the signal from the EP2 or split the signal from the Env out on the back of the MF-101 (or both if it's possible).

Thanks
by xgsjx
Thu Apr 07, 2011 3:04 am
Forum: Controllers Forum
Topic: Splitting CV signals
Replies: 0
Views: 1181

Splitting CV signals

Hi folks, Does anyone know if it's possible to split a CV signal with something as simple as a TRS Y lead or would I need something like the CP251? My ideas are to either split the signal from the EP2 or split the signal from the Env out on the back of the MF-101 (or both if it's possible). I'm gonn...
by xgsjx
Tue May 05, 2009 6:35 pm
Forum: Moogerfooger Forum
Topic: Bass MurF tutorial???
Replies: 18
Views: 6198

I have my bass going into the 105b then into the 101 with a trs cable from the env out to the lfo in. The 105b is being used as an overdrive with the lpf right up & everything else near the bottom except the 525 which is near the middle, the drive is 2/3 on & animation is set to 1a. The 101 is set w...
by xgsjx
Fri Feb 20, 2009 6:21 am
Forum: Moogerfooger Forum
Topic: MF-101 Buzz?
Replies: 2
Views: 1701

MF-101 Buzz?

My MF-101 buzzes quite a bit & I've tried the copper shielding as mentioned elsewhere in this forum & it still buzzes. I have discovered that if I move the cable that runs from the MF-101 to the amp the buzz changes in volume & if I hold the cable with both hands it goes away. I have tried 4 differe...
by xgsjx
Thu Jan 29, 2009 7:11 am
Forum: Moogerfooger Forum
Topic: Patching the 101 to the 105b
Replies: 2
Views: 1668

Patching the 101 to the 105b

I've been messing about with the env out from the 101 into different inputs on the 105b with a mono patch cable (TS I think it gets classed as). Would using a TRS cable make the env out work in a similar fashion to an expression pedal where it would control the amount of the given parameter (eg: mix...
by xgsjx
Thu Jan 22, 2009 7:09 pm
Forum: Moogerfooger Forum
Topic: Tap Tempo x2
Replies: 7
Views: 2692

Thanks, that's cool.
Was just curious.
by xgsjx
Thu Jan 22, 2009 10:09 am
Forum: Moogerfooger Forum
Topic: Tap Tempo x2
Replies: 7
Views: 2692

Thanks G,

So the 2:1 ratio is against the 16th notes, that makes sense.

Sorry to be a pest but do you know if there is a way to double this up, ie 4:1 ratio?

Cheers,

G