Page 1 of 2
My LP is dead
Posted: Fri Oct 02, 2009 3:07 pm
by tonedefmusic
I attempted a firmware update last nite. To make sure I had good midi cables I sent my sounds to my laptop, reset the board, then sent them back to the unit. Everything was ok.
Use MIDI-OX to send the Stage 2.2 OS and walked away. Came back to a Cycle power error. Cycled the power thinking it would ask for a reload, now all I have is a blank screen.
Re: My LP is dead
Posted: Fri Oct 02, 2009 3:33 pm
by CTRLSHFT
tonedefmusic wrote:I attempted a firmware update last nite. To make sure I had good midi cables I sent my sounds to my laptop, reset the board, then sent them back to the unit. Everything was ok.
Use MIDI-OX to send the Stage 2.2 OS and walked away. Came back to a Cycle power error. Cycled the power thinking it would ask for a reload, now all I have is a blank screen.
Amos to the rescue! Contact Moog Support, it should be fixable without returning it to the factory.
Re: My LP is dead
Posted: Fri Oct 02, 2009 3:58 pm
by tonedefmusic
[quote="CTRLSHFT
Amos to the rescue! Contact Moog Support, it should be fixable without returning it to the factory.[/quote]
I called and spoke to Ryan today. He suggested I return it., then mentioned something about a $35 debug adapter.
Posted: Fri Oct 02, 2009 4:48 pm
by dave500
Ryan is talking about you doing this...
http://www.youtube.com/watch?v=-VMCijPZiLU
good luck
Posted: Fri Oct 02, 2009 5:29 pm
by Solenoid
Another one? Why? What is causing these errors?
Re: My LP is dead
Posted: Fri Oct 02, 2009 6:23 pm
by CTRLSHFT
tonedefmusic wrote:[quote="CTRLSHFT
Amos to the rescue! Contact Moog Support, it should be fixable without returning it to the factory.
I called and spoke to Ryan today. He suggested I return it., then mentioned something about a $35 debug adapter.[/quote]
That's pretty sucky, but glad they have an alternative to a factory return.
Posted: Fri Oct 02, 2009 7:48 pm
by T7
They should offer an external debug port mod.
In all seriousness, sorry your LP died.
Posted: Sat Oct 03, 2009 8:09 am
by Solenoid
T7 wrote:They should offer an external debug port mod.
In all seriousness, sorry your LP died.
and a free debugger...
Posted: Sun Oct 04, 2009 2:58 am
by Amos
did you make sure to set the buffer size correctly in MIDI-OX before doing the transfer? That could have caused this error.
Posted: Wed Oct 07, 2009 1:04 pm
by tonedefmusic
Amos wrote:did you make sure to set the buffer size correctly in MIDI-OX before doing the transfer? That could have caused this error.
I followed the instructions, setting MIDI OX to 1024 or something to that effect, I have the instructions on my other laptop...I used a MIDISPORT UNO...I downloaded the file and instructions directly from the moogmusic site.
-T
Posted: Sat Oct 17, 2009 6:40 am
by cane creek
My Little Phatty also died
THIS VIDEO i made may give you an idea how easy it is to use a debugger.
De bugger failed to work
Posted: Sat Oct 17, 2009 10:13 am
by locky
Hi, my debugger arrived today and I have this message appearing 'communication could not be established with the specified adapter. Please confirm the current adapter and cable connection'. Can anyone help, I do not know what to do next - any advice please?
Posted: Sat Oct 17, 2009 10:16 am
by locky
Sorry I meant to say I normally work on an imac and this is what I used to perform the update for my stage LP to version 2.2. WhenI got the debugger I was told to use a PC I have tried it on two different PCs and had the same message I describe in the above post...
Posted: Sat Oct 17, 2009 10:45 am
by Subtronik
What should MIDI OX be set for?
Posted: Sat Oct 17, 2009 11:00 am
by cane creek
Did you download the 'Flash programming utility' from
HERE ? (bottom of the page)
You need to install the 'flash programming utilitys' on your PC before you can use the debugger.