Page 1 of 1

My Low Pass filter is broken?

Posted: Mon Jun 08, 2009 10:40 am
by AntonLi
My filter is broken?

I from Russia, forgive my bad English.
I have ordered on ebay new Moog Low pass.
I connect the guitar. I twist the knob "Amount" and I do not hear any difference in sound. The switch smoouth / fast does not give any effect too.


My filter is broken? Whether probably it to repair?

Re: My Low Pass filter is broken?

Posted: Tue Jun 09, 2009 11:45 am
by Bryan T
AntonLi wrote:My filter is broken?

I from Russia, forgive my bad English.
I have ordered on ebay new Moog Low pass.
I connect the guitar. I twist the knob "Amount" and I do not hear any difference in sound. The switch smoouth / fast does not give any effect too.


My filter is broken? Whether probably it to repair?
Have your turned up the Drive knob and turned down the Cutoff frequency knob?

The Drive knob needs to be high enough so that the Env light comes on. The Cutoff knob needs to be set lower so that the envelope has something to control.

Hope that helps and I hope your pedal isn't broken.

Bryan

Posted: Wed Jun 10, 2009 6:55 pm
by AntonLi
Brayan, thanks but no results. Amount knob does not change anythings (((
Please anyone help me!!!

Its is 300$ with shipping to Russia :(((((
For me it is very big :(((
Anton.

What the f???!!!

Posted: Mon Jun 15, 2009 6:59 pm
by AntonLi
Isn t it official moog forum??? Why anyone does t post me any answers???

Re: What the f???!!!

Posted: Mon Jun 15, 2009 7:16 pm
by Just Me
AntonLi wrote:Isn t it official moog forum??? Why anyone does t post me any answers???
"PM" Amos. or go here: http://www.moogmusic.com/service/

Posted: Sat Jul 11, 2009 11:22 pm
by CloseToTheEdge
If you read the manual, the features are revealed in a sequence.

When I first plugged mine in, I had to experiment with the CUTOFF knob and the RESONANCE in order to hear the effect. Proper adjustment is key with this device.

Posted: Sun Jul 12, 2009 5:25 pm
by Brian G
Sorry if you all ready checked this, but make sure the BYPASS led is GREEN. WHen Red it is in bypass mode and the knobs will not have have an effect.