Page 1 of 1
[video] Little Phatty with Doepfer R2M ribbon controller
Posted: Wed Jan 09, 2008 9:43 am
by Zorn
Here's another of my experiments with the Little Phatty, this time with Doepfer R2M ribbon controller:
I connected the R2M box to the Phatty with two pactch cables: the first controlling the pitch CV and the second for the volume CV (by pressing on the controller).
This is the result:
http://www.youtube.com/watch?v=wZblzFM_WWg
Posted: Wed Jan 09, 2008 11:45 am
by Henfield
Very nice solo, it is nice to see the LP used with a different controller than the standard keyboard, especially using CV!
How long did it take you to get hang of getting the proper pitch on the Doepfer?
Posted: Wed Jan 09, 2008 1:55 pm
by Zorn
Henfield wrote:How long did it take you to get hang of getting the proper pitch on the Doepfer?
...mmm about 30 minutes!
Great
Posted: Wed Jan 09, 2008 7:43 pm
by dave500
Loved it.
Posted: Thu Jan 10, 2008 8:04 am
by GregAE
Nicely done!
question
Posted: Thu Jan 10, 2008 1:07 pm
by djghostdogg
you were able to use the Doepfer ribbon controller without anything else?
straight into the Little Phatty's pitch CV input??
yes or no?
Posted: Thu Jan 10, 2008 6:20 pm
by Zorn
The ribbon is connected to its controller box, which have 2 CV outs and gate.
Posted: Wed Feb 06, 2008 8:32 am
by Tangsonghe
Harder than a violin or cello?
Posted: Wed Feb 06, 2008 2:18 pm
by Zorn
It's much easier than a theremin. The scale is regular so the intervals between the octaves have the same lenght.
I set the controller to 3 oct range and put a little mark on every octave.
If you have an average ear you can master it very quickly.
Posted: Wed Feb 27, 2008 1:03 pm
by jbird
Beautifully done!!
(I'm going to save
up for a ribbon controller
for my LP.)
Thanks for the inspiration,
jbird