Moog Music Forum

I was trying to record midi data from my LP SE to Cubase or something similar.
Recording is OK, the LP sends all data correctly, but when I playback the things I've recorded from any sequencer, the range of the pitch bender don't correspond to the settings I've used...

Ex:
if I record using pitch bender UP:+12 DN:-12, when in playback via MIDI it sound like it's +2 and –2

Is there a solution for this? Is there something I missed?

Thanks!

When you record pitch bend, all you're doing is recording a number value 0-127. If you play it back it should change the pitch according to whatever the pitch wheel was saved to. The pitch change amount is determined by what the settings are on the patch you're using on the LP, not Cubase. In other words, if your patch goes from -2 to +2, in Cubase 0 will be -2, 64 will be 0, and 127 will be +2. If your patch is -12 to +12, in Cubase 0 will be -12, 64 will be 0, and 127 will be +12. Were you playing the part back on a patch that had saved your -12 to +12 pitch bends?

Yes, I know how it works about the values of the CCs...
and yes, the part I selected when I was in MIDI playback had the right settings (+/– 12)...

It seems that my LP plays always at +/–2 regardless of the settings I use in any patch...

How is this possible?

interesting... could be a firmware bug. I'll look into it.

If there is something you're missing that will make it work correctly, I'll be sure to post and let you know.

Cheers,

Amos

I've got exactly the same problem with my LP TE !!
Please help!!

the programmer has confirmed that this is a bug... I'll see about an update ASAP. Thanks for reporting this!

-Amos

Is this bug also fixed in the new OS?

Yes, It's all right now!

Thanks!