Grandmother step-advance clock & reset issue
Posted: Tue May 23, 2023 9:23 am
Hi, does anyone success to trig the GrandMother arp/seq with a sequencer (no MIDI, only with CV) ?
I can't achieve a strong and repetitive result.
It works most of the time but, let’s say once in 5 times, it resets on the root note one step later, or doesn't advance to the next note.
I tried with different Eurorack sequencers (WMD Metron, Intellijel Steppy), different attenuation levels of the triggers sent, different gate lengths. Nothing makes a good result.
Here is my setup:
- Sequencer track 1 output to GM clock-in (in step-advance mode)
- Sequencer track 2 output to GM reset input
Then switch on Play and Hold buttons, play an arp.
I think it would be very cool to be able to drive the rhythm with sequencer and simultaneously play arps on the GM.
If the above setup works, I could add Sequencer track 3 output to trigger in, and all this could be a lot of fun.
Any help would be very appreciated!
I can't achieve a strong and repetitive result.
It works most of the time but, let’s say once in 5 times, it resets on the root note one step later, or doesn't advance to the next note.
I tried with different Eurorack sequencers (WMD Metron, Intellijel Steppy), different attenuation levels of the triggers sent, different gate lengths. Nothing makes a good result.
Here is my setup:
- Sequencer track 1 output to GM clock-in (in step-advance mode)
- Sequencer track 2 output to GM reset input
Then switch on Play and Hold buttons, play an arp.
I think it would be very cool to be able to drive the rhythm with sequencer and simultaneously play arps on the GM.
If the above setup works, I could add Sequencer track 3 output to trigger in, and all this could be a lot of fun.
Any help would be very appreciated!