Minitaur cv inputs
Minitaur cv inputs
Just wondering if it is possible to trigger the release switch remotely like with a foot pedal. This seems to be a bit of a flaw considering you can do volume/pitch this way. Plus it was one of the main Taurus 1 features. Even a cheap keyboard has a sustain pedal! Midi control is all very well but I won’t be hooking it up to a computer as it’s for live use. Thanks in advance for any responses.
-
- Posts: 202
- Joined: Fri Nov 21, 2008 7:55 am
Re: Minitaur cv inputs
With many keyboard controllers you can assign cc’s, note numbers, etc to sustain pedal and many come with assignable buttons if you don’t have a pedal. There is no need for a computer to use MIDI.
Last edited by Acid Mitch on Wed Apr 25, 2018 6:29 am, edited 1 time in total.
Re: Minitaur cv inputs
You just need to send MIDI CC #64.
This is the control of the sustain pedal, sometimes also called hold pedal.
And indeed, most MIDI keyboards do send this controller if a pedal is attached, or a special hold button on the keyboard is used.
This is the control of the sustain pedal, sometimes also called hold pedal.
And indeed, most MIDI keyboards do send this controller if a pedal is attached, or a special hold button on the keyboard is used.
keep on turning these Moog knobs
Sequence:
Prodigy * minimoog '79 * Voyager * MF102 * MF103 * MF104z * MP201 * Taurus 3 * Minitaur * Sub Phatty * MF105 * Minimoog 2017+ MUSE * One 16
Sequence:
Prodigy * minimoog '79 * Voyager * MF102 * MF103 * MF104z * MP201 * Taurus 3 * Minitaur * Sub Phatty * MF105 * Minimoog 2017+ MUSE * One 16
Re: Minitaur cv inputs
I figured this out by remapping one of the cv inputs to do release.
Sometimes you just need things n plain English!
Sometimes you just need things n plain English!