Moog Music Forum

Hoping someone can confirm.

Press Master, scroll to Local Control and switch Pots to "OFF"

Press Panel (maybe 2x) go to Parameter Display and select "YES" or "3sec"

Now turn a couple of Filter type knobs to see the readings are changing from one knob to another

Now Turn Osc 2 Freq knob. And then turn any other knob. Is the display stuck on Osc2?

You can turn local control of Pots back to on to get out of this.


Osc 2 frequency appears to be the only parameter that locks up the display. After reloading 3.6 with no change I reverted back to 3.5 and the issue is not present. I then reloaded 3.6 again and the issue returned.

Thanks.

Hi Markyboard,
what version of Voyager is it? RME, XL or regular?
What is the release date of the 3.6 version?

Hi Markyboard,
you are right - I fixed it (I hope...)

Here you can get the 3.6 version for the regular Voyager:
http://www.moogmusic.de/3.6_Beta.zip

Here you can get the 3.6 version for the XL Voyager:
http://www.moogmusic.de/XL_3.6_Beta.zip

And here you can get the 3.6 version for the RME Voyager:
http://www.moogmusic.de/RME_3.6_Beta.zip

Thanks to let me know

Have fun,
Rudi

Wow - that's incredible responsiveness.

Seriously - thanks so much Rudi!!!

And I just confirmed it works. BTW I have the original Signature Voyager.

Thanks again Rudi. I'm still in disbelief - and now spoiled for life!