CV Mapping Empowers DUO Mode!
Posted: Mon Jan 26, 2015 2:13 pm
Hi Gang,
While there may someday be even more ways to do this, the next Sub 37 update's CV MAPPING feature will allow you to use a Sustain Pedal in the GATE IN jack to control the OSC 2 ON parameter.
Depending on whether you use a Normally Open (N.O.) or Normally Closed (N.C.) pedal, you'll be able to turn OSC 2 ON or OFF at will.
This is a reasonable solution for those who don't want OSC 2 to join OSC 1 when you go from playing two notes to only playing one note. Simply use the Sustain Pedal to make OSC 2 sound only when you want it to.
If you don't already own one, now is the time to get a Sustain Pedal that has a N.O./N.C. switch, 'cause you're going to want one right after you install the next update for this and many other GATE IN destinations!
While there may someday be even more ways to do this, the next Sub 37 update's CV MAPPING feature will allow you to use a Sustain Pedal in the GATE IN jack to control the OSC 2 ON parameter.
Depending on whether you use a Normally Open (N.O.) or Normally Closed (N.C.) pedal, you'll be able to turn OSC 2 ON or OFF at will.
This is a reasonable solution for those who don't want OSC 2 to join OSC 1 when you go from playing two notes to only playing one note. Simply use the Sustain Pedal to make OSC 2 sound only when you want it to.
If you don't already own one, now is the time to get a Sustain Pedal that has a N.O./N.C. switch, 'cause you're going to want one right after you install the next update for this and many other GATE IN destinations!
Another cool thing I did was map Filter CV In to Filter poles and swept that with an expression pedal. Pretty damn cool.