Sub Phatty TouchOSC Control Panel for iPod/iPhone 4/iPad
Posted: Sat Aug 10, 2013 1:05 pm
Hey all,
Here's the TouchOSC control panel that I was talking about in another thread.
iPhone 4/iPod : http://pastelink.me/dl/eeaafa
iPad : http://pastelink.me/dl/7d28d2
Install
To install it, given that you have the TouchOSC app, you can simply use iTunes. Plug your iOS device, select it and go to the App page. At the bottom, you should see a list of apps and a list of files to the right. Select TouchOSC in the app list and click on Add File to add the Sub Phatty's control panel layout.
Now in TouchOSC, you'll just have to load the new layout by clicking on the settings button, then layout.
Setup
Currently I have a iRig (http://www.ikmultimedia.com/products/irigmidi/) so I can use the control panel without a computer. There are some other options (e.g. the Camera Connectivity Kit) that might be cheaper, so look around.
If you don't want to spend a dime, you can use TouchBridge (http://hexler.net/software/touchosc at the bottom) on your computer to relay MIDI message from the TouchOSC app to your Sub Phatty. Note that, on Windows at least, you might need to hook up your Sub Phatty by MIDI DIN and USB if you want to use this setup while recording in a DAW, because Windows lock MIDI ports to a single application.
Features
Pretty much all hidden parameters are there (there's 5 pages) except the EG gate source control, since it's a very uncommon parameter to edit and you don't want to change that parameter by accident.
Also you will notice two button on the first page - tic and toc. Those are used to ask the Sub Phatty to dump all its parameters in CC. You need to press the left then the right button without touching anything else for it to work. Once this is done, the interface should represent the values currently in the Sub Phatty. If you change the current preset, you'll need to do this again.
Finally, If you want to edit the panel, you will need the TouchOSC editor at the bottom of this page : http://hexler.net/software/touchosc
Looking for feedback!
Here's the TouchOSC control panel that I was talking about in another thread.
iPhone 4/iPod : http://pastelink.me/dl/eeaafa
iPad : http://pastelink.me/dl/7d28d2
Install
To install it, given that you have the TouchOSC app, you can simply use iTunes. Plug your iOS device, select it and go to the App page. At the bottom, you should see a list of apps and a list of files to the right. Select TouchOSC in the app list and click on Add File to add the Sub Phatty's control panel layout.
Now in TouchOSC, you'll just have to load the new layout by clicking on the settings button, then layout.
Setup
Currently I have a iRig (http://www.ikmultimedia.com/products/irigmidi/) so I can use the control panel without a computer. There are some other options (e.g. the Camera Connectivity Kit) that might be cheaper, so look around.
If you don't want to spend a dime, you can use TouchBridge (http://hexler.net/software/touchosc at the bottom) on your computer to relay MIDI message from the TouchOSC app to your Sub Phatty. Note that, on Windows at least, you might need to hook up your Sub Phatty by MIDI DIN and USB if you want to use this setup while recording in a DAW, because Windows lock MIDI ports to a single application.
Features
Pretty much all hidden parameters are there (there's 5 pages) except the EG gate source control, since it's a very uncommon parameter to edit and you don't want to change that parameter by accident.
Also you will notice two button on the first page - tic and toc. Those are used to ask the Sub Phatty to dump all its parameters in CC. You need to press the left then the right button without touching anything else for it to work. Once this is done, the interface should represent the values currently in the Sub Phatty. If you change the current preset, you'll need to do this again.
Finally, If you want to edit the panel, you will need the TouchOSC editor at the bottom of this page : http://hexler.net/software/touchosc
Looking for feedback!
