Page 1 of 1
low pass filter envelope follower
Posted: Mon Oct 03, 2005 1:53 pm
by dotlikeimpact
is it possible to use the envelope follower when the effect is bypassed? i'm interested in using both the lpf and the phaser, with the envelope follower as a control voltage for the phaser lfo speed. is this possible, or am i barking up the wrong tree?
Posted: Mon Oct 03, 2005 3:07 pm
by Dannymon
Yes, it is possible.
Posted: Wed Oct 05, 2005 7:27 am
by dotlikeimpact
how? does the EF just keep spitting out CV with the bypass switch engaged?
Posted: Wed Oct 05, 2005 9:31 am
by Dannymon
You will still need to have an audio signal going into the MF101 in order to trigger the envelope and even if the filter is off (Bypassed), the envelope out will still send the Env CV. Same applies to the Ring modulator and Phaser pedals, where even if the effects are bypassed they will still generate an LFO through the LFO out.
I hope this answers your question.
Posted: Wed Oct 05, 2005 10:27 pm
by godzilla
does the smooth switch work on the env output at all and when bypassed?
Posted: Thu Oct 06, 2005 3:54 pm
by Dannymon
Yes, it does work.