Page 1 of 1
FIlter Spacing Question/Fix
Posted: Fri Jan 04, 2013 1:44 am
by krismiller1982
Problem - When using my Voyager in stereo I've noticed lately one side seems to output higher frequencies, while the other side is dull. This is very noticeable when I create plucky bass sounds. I've trouble shooted my cables, inputs & speakers & all are a-okay. All I can narrow it down to now - & this is just a guess - is that somehow my filter spacing has drifted out of wack. Is this possible? Are there any DIY fixes to calibrate or maintenance the Voyager myself? I have access to a good solder iron kit, oscilloscope, & other electronic test/repair equipment. Hope to hear some feedback from you guys ASAP. Thanks!!
Re: FIlter Spacing Question/Fix
Posted: Fri Jan 04, 2013 6:28 pm
by astricii
Check the filter pole settings are identical for filter a and b . if those are the same try adjusting your spacing and see how out of whack it is. Probably a question for tech support after that.
Re: FIlter Spacing Question/Fix
Posted: Fri Jan 04, 2013 8:08 pm
by Mr Shave
Wait, we can change the filter pole settings of each filter individually? Why have I never known this?
Re: FIlter Spacing Question/Fix
Posted: Fri Jan 04, 2013 11:49 pm
by astricii
In the edit menu man
123or4 pole for each.
Re: FIlter Spacing Question/Fix
Posted: Sat Jan 05, 2013 11:58 am
by ColorForm2113
Mr Shave wrote:Wait, we can change the filter pole settings of each filter individually? Why have I never known this?
RTFM dude lol
Re: FIlter Spacing Question/Fix
Posted: Thu Jan 10, 2013 6:34 pm
by Mr Shave
ColorForm2113 wrote:Mr Shave wrote:Wait, we can change the filter pole settings of each filter individually? Why have I never known this?
RTFM dude lol
Ouch. i've read the manual so many times its not even funny. Didnt pay close enough attention to that particular step... Just assumed the filter pole options affected both filters simultaneously...
Re: FIlter Spacing Question/Fix
Posted: Thu Jan 10, 2013 10:51 pm
by ColorForm2113
Mr Shave wrote:ColorForm2113 wrote:Mr Shave wrote:Wait, we can change the filter pole settings of each filter individually? Why have I never known this?
RTFM dude lol
Ouch. i've read the manual so many times its not even funny. Didnt pay close enough attention to that particular step... Just assumed the filter pole options affected both filters simultaneously...
Didn't mean that in a harsh way just playful teasing. I have plenty of RTFM moments too
