Moog Music Forum

Stuka wrote:Does anyone here have a recommended "mod" to allow better
access when using the Moog rack? I would still want to be able
to mount 3 Moogerfoogers side-by-side.

Hi Stuka,

I currently have 6 Foogers racked and plan to build a second rack soon.

I'm using a low-cost Table Top Rack Stand ($29.95) and 2 Fooger Rack Kits:
http://www.sweetwater.com/store/detail/TableRackStd/
http://moogmusic.com/products/accessori ... -mount-kit

As you correctly speculated, it is difficult to plug into all of the CV and Audio
jacks of the three lower Foogers.

Here's my trick:

On the lower set of Foogers, I simply put a pair of rubber grommets in between the
top holes of the Mounting Kit and the Rack Rails before I inserted the rack screws.
The end result is that the lower three Foogers are tipped outward just enough that
you can now access all of the jacks without scraping the Foogers above them.

If you're only racking three Foogers for now, this may or may not work for you
depending on the shape of the gear above them. But you may be able to do it by
adding a few more rubber grommets to each side.

Cool -

Thanks Dan!

Randy

Yea - thanks for sharing this idea!

It might come in handy when my rackmount kits finally arrive.

David.

curious, got a pic by chance?

These pedals could of been just a bit smaller!!

Dont know if this will upload but here whe go

I did mine like this just placed 3 big plastic washers between the rack mont and rack, then a larger screw and you can reach the patchpoints with eaz