Page 2 of 2
Re: moog 901a/b clone available from SYNTH-WERK.COM
Posted: Sat Jun 01, 2013 11:16 am
by whitenoise
Goom wrote:What is the price for a single 901B shipped to the US? Thank you.
Because of the intensive work to tune a 901a/b bank for good tracking over approx. 3,5 Oct. we decided to sell only the complete bank. This will include 1x 901a and 3x 901b. We also strongly recommend the CP3 as the combining mixer for the oscillators. Price is 1.200 Euro plus shipping.
If you need a single 901b to extend an existing moog 901a/b bank we can do this but we need to talk about the power supply requirements you have and also you need to do the tracking adjustments on your own.
cheers
Gerhard
Re: moog 901a/b clone available from SYNTH-WERK.COM
Posted: Sun Jun 02, 2013 11:38 am
by Goom
Okay, thank you for the info. Do your 901a/b modules use the same voltages as the original Moog modules? I'm not currently ready to add more modules, I just wanted to get an idea if the opportunity came up.
Re: moog 901a/b clone available from SYNTH-WERK.COM
Posted: Sun Jun 02, 2013 3:12 pm
by whitenoise
Goom wrote:Okay, thank you for the info. Do your 901a/b modules use the same voltages as the original Moog modules? I'm not currently ready to add more modules, I just wanted to get an idea if the opportunity came up.
All modules follow the moog format and come with the standard „.com“ connector for easy integration in existing systems. The modules work with supply voltages of +15/-15 Volt. Each module has it`s own power regulation to +12/-6 Volt.
Re: moog 901a/b clone available from SYNTH-WERK.COM
Posted: Sun Jun 02, 2013 11:51 pm
by Voltor07
whitenoise wrote:Goom wrote:Okay, thank you for the info. Do your 901a/b modules use the same voltages as the original Moog modules? I'm not currently ready to add more modules, I just wanted to get an idea if the opportunity came up.
All modules follow the moog format and come with the standard „.com“ connector for easy integration in existing systems. The modules work with supply voltages of +15/-15 Volt. Each module has it`s own power regulation to +12/-6 Volt.
As a .com owner myself, I can appreciate this offering!
Re: moog 901a/b clone available from SYNTH-WERK.COM
Posted: Mon Jun 03, 2013 1:51 am
by Kevin Lightner
The dual regulators in these modules is actually a very smart idea.
Besides that it can accept various power sources, having each VCO separately regulated allows them to be moved around in a system without fear of varied loading or power wire resistances.
It's what Polyfusion did on their VCOs and what Oberheim did on their SEMS and Minisequencers.