Cluster flux self Oscillation?

[BHC303]

I think my unit fails to self Oscillate?

Any tips to get it to self Oscillate?

[BHC303]

I can get the 108 to self oscillate when not plugged into the voyage mixer out filter in?

EDIT: I can get the flux to self OSC

But not when plugged into the voyager mixer out filter in...

New thread...

[BHC303]

double

[SteveD]

The Mixer out level of the Voyager is very hot, and if you have oscillators levels up, they are always running (remember this patch point is pre-VCA), so it is possible that you wouldn't hear the CF self-oscillation. Now if you made sure all the mixer levels are turned down - but then you'll just get the self oscillation of the CF, although I doubt that's the awesome patch you're looking for...
Another approach would be to plug the CF into the Ext audio in - then you don't have the VCOs @ the input of the device and you should be able to use the CF as an extra oscillator.

Cheers
SD

[BHC303]

Thanks Steve, you nailed it!

I think one of my cords might have been shot or my break out cable did not have a good connection, as I didn't get a nice stereo sound last night, but now I have & I can self OSC