mp201 gas pedal sending no cv messages

This is the place to share tips, tricks and questions about Moog's controller products; the MP-201 Multi-Pedal and the EP-2. There are a world of applications for these expression enhancers. Explore...
Post Reply
gibson
Posts: 5
Joined: Mon Oct 31, 2011 3:51 pm

mp201 gas pedal sending no cv messages

Post by gibson » Sun Mar 18, 2012 10:35 am

Hello, I have a new mp201 and everything seems ok but the pedal from heel to toe changes only from +5.00 to 4.99 volts and sometimes stays at +5 with no modification at all, I've tried everything from unipolar to bipolar switching and several footpedal calibrations but the problem is always there... I'm going to send it back but maybe someone knows how to fix it! Thanks

shortsleeves
Posts: 67
Joined: Wed Aug 03, 2011 10:27 am

Re: mp201 gas pedal sending no cv messages

Post by shortsleeves » Mon Mar 19, 2012 6:44 am

Have you looked at the range of parameter change the pedal is set to use? Maybe that's the problem.

Cheers,
Lukasz
My SoundCloud: http://soundcloud.com/shortsleeves. Enjoy, and leave a comment!

gibson
Posts: 5
Joined: Mon Oct 31, 2011 3:51 pm

Re: mp201 gas pedal sending no cv messages

Post by gibson » Mon Mar 19, 2012 7:18 am

Yep, the range it's the correct one, from 0 to 4095... When I make the footpedal calibration the upper value it's around 3300 while the lower one it's always 1023 and doesn't change, maybe this is the problem... Thanks for your replies, Antonio

Post Reply