Moogertron Mk II Test Panel
- latigid on
- Posts: 1579
- Joined: Mon Jan 30, 2006 3:47 pm
- Location: Auckland, New Zealand
Moogertron Mk II Test Panel
The next stage of Moogertron: one big panel.
This one is just acrylic, which is too flimsy and too thick to work in the final version.
Designed by brother Pete, now I have to do the electronics.
8x 9VDC powersupply: done
Desolder panel jacks, or extend those which have board connectors
Work in mods (104 spillover, 101 ext. trigger, CV attenuators etc.)
Add bling
The final panel will be made of thin steel and will probably be powercoated and screen printed.
Watch this space!
Andy
This one is just acrylic, which is too flimsy and too thick to work in the final version.
Designed by brother Pete, now I have to do the electronics.
8x 9VDC powersupply: done
Desolder panel jacks, or extend those which have board connectors
Work in mods (104 spillover, 101 ext. trigger, CV attenuators etc.)
Add bling
The final panel will be made of thin steel and will probably be powercoated and screen printed.
Watch this space!
Andy
Re: Moogertron Mk II Test Panel
That's gonna look wild !
"Although they heard the music..they didn't understand the tune"
-
- Posts: 1279
- Joined: Fri Feb 02, 2007 2:17 am
- Location: Illinois(e)
Re: Moogertron Mk II Test Panel
so....do you think this will void the warranty on your moogs?
but seriously that is going to be insane when its finished! kudos
but seriously that is going to be insane when its finished! kudos
My modular so far: Q104, Q106 x2, Q107, Q108, Q109 x2 , Q116, Q118, Q127 w/Q140, Q130, STG Wave Folder, Mixer and Mankato playing with Moog Voyager, VX-351, CP-251, MF-104M x2 ( STEREO!) Volca Beats and Bass, Arturia Beat step
- latigid on
- Posts: 1579
- Joined: Mon Jan 30, 2006 3:47 pm
- Location: Auckland, New Zealand
Re: Moogertron Mk II Test Panel
Heya!
Wait until it's got backlit acrylic letters and fancy gadgets!
Warranty: gone! The ring mods and filter were second hand anyway, the rest well over a year old. The only thing recent was a MIDI MuRF, luckily that won't need desoldering. Hopefully not too many static-sensitive parts... I'm careful.
So I've got all the PCB-mounted sockets off, next is to wire the new sockets so they can sit above or below the 'foogers. And put in CV mods where appropriate. Man it was hard torching the 104SD... please forgive me!
Wait until it's got backlit acrylic letters and fancy gadgets!
Warranty: gone! The ring mods and filter were second hand anyway, the rest well over a year old. The only thing recent was a MIDI MuRF, luckily that won't need desoldering. Hopefully not too many static-sensitive parts... I'm careful.
So I've got all the PCB-mounted sockets off, next is to wire the new sockets so they can sit above or below the 'foogers. And put in CV mods where appropriate. Man it was hard torching the 104SD... please forgive me!
Re: Moogertron Mk II Test Panel
Im curious as to what made you choose that particular arrangement of Foogers. In my rack I put, 107 102 104z. My other rack is to contain 103 101 105b whenever I get the 105b, and I haven't figured out the order of that yet.
I don't usually keep mine strictly in the audio chain, but the 102 went in the middle because it was the oldest and had scratches on the cheeks so my placement is determined by which one I want to sacrifice the cheek pieces on.
When I get my other rack I might change the order more to the Fooger synth, but I was thinking that the 103, 101, 105b makes a pretty nice filter bank.
Awesome design though...i really wish that I could do stuff like that.
Can't wait to see what it looks like!
Eric
I don't usually keep mine strictly in the audio chain, but the 102 went in the middle because it was the oldest and had scratches on the cheeks so my placement is determined by which one I want to sacrifice the cheek pieces on.
When I get my other rack I might change the order more to the Fooger synth, but I was thinking that the 103, 101, 105b makes a pretty nice filter bank.
Awesome design though...i really wish that I could do stuff like that.
Can't wait to see what it looks like!
Eric
Support the Bob Moog Foundation:
https://moogfoundation.org/do-something-2/donate/
I think I hear the mothership coming.
https://moogfoundation.org/do-something-2/donate/
I think I hear the mothership coming.
- latigid on
- Posts: 1579
- Joined: Mon Jan 30, 2006 3:47 pm
- Location: Auckland, New Zealand
Re: Moogertron Mk II Test Panel
Eric, I think it had something to do with a basic model number order, then arranging the two ring mods and MuRFs together for symmetry. With all the front-mounted sockets, patching is no big deal. It even helps to have a little bit of space between them.
psi, it's not too bad! The first version had lots of wood panels and very heavy sockets (about 8 kg/ 20 lb of metal). This version was designed to be lifted by one person and have a more compact arrangement.
I think the rear will be acrylic (as long as there isn't too much RFI) so you can see all the circuits and the lights peeking through.
psi, it's not too bad! The first version had lots of wood panels and very heavy sockets (about 8 kg/ 20 lb of metal). This version was designed to be lifted by one person and have a more compact arrangement.
I think the rear will be acrylic (as long as there isn't too much RFI) so you can see all the circuits and the lights peeking through.
-
- Posts: 126
- Joined: Mon Nov 08, 2010 5:08 am
Re: Moogertron Mk II Test Panel
Hi there Im looking at getting HFA Electronics in Auckland to build a 4 x 9V DC powersupply
Im very interested in your powersupply design--can you PM me
Im very interested in your powersupply design--can you PM me
-
- Posts: 14
- Joined: Mon Sep 06, 2010 4:15 pm
Re: Moogertron Mk II Test Panel
are there any finished shots of this yet?
Re: Moogertron Mk II Test Panel
Probably building a new one to accommodate the ClusterFLux
Gear list: '04 Saturn Ion, John Deere X300 tractor, ganged set of seven reel mowers for 3 acres of lawn, herd of sheep for backup lawn mowers, two tiger cats for mouse population control Oh you meant MUSIC gear Oops I hit the 255 character limi
- latigid on
- Posts: 1579
- Joined: Mon Jan 30, 2006 3:47 pm
- Location: Auckland, New Zealand
Re: Moogertron Mk II Test Panel
Yeah, probably one of the MuRFs or Ring Mods should be relegated.
I have been terribly slack on this, trying to write up a PhD, but I will have a lot more time when that is done.
Semi-finished:
I have been terribly slack on this, trying to write up a PhD, but I will have a lot more time when that is done.
Semi-finished:
Re: Moogertron Mk II Test Panel
oh my god that is so beautiful. kill two birds with one stone and write a phd about your moogertron. i'd give you an a+.
Re: Moogertron Mk II Test Panel
He wouldn't have to defend that dissertation to us!
Nice work! Looks heavy.
Nice work! Looks heavy.
Support the Bob Moog Foundation:
https://moogfoundation.org/do-something-2/donate/
I think I hear the mothership coming.
https://moogfoundation.org/do-something-2/donate/
I think I hear the mothership coming.
-
- Posts: 14
- Joined: Mon Sep 06, 2010 4:15 pm
Re: Moogertron Mk II Test Panel
awesome, really hope you get it finished mate, so good to see things like this, well inspiring,
cheers
cheers
-
- Posts: 3
- Joined: Fri Sep 09, 2011 12:22 am
Re: Moogertron Mk II Test Panel
Wow... that's amazing
Mind you, taking apart a 104sd should be against the law!
Mind you, taking apart a 104sd should be against the law!