Audio in, HOW ?

slabwax · Post by **slabwax** » Tue Sep 23, 2008 7:08 pm

I just received my new LP Stage II. It all seem to work great. I'm sure the few things going on is my own doing (or not doing). I tried to run audio into the L.P. and nothing. Is there something I should be looking at. There is not a whole lot info in the owners manual. Thanks for any tips.

The next questions will be about midi.

Thanks
Dean

Maskin · Post by **Maskin** » Tue Sep 23, 2008 7:57 pm

Have you tried to play a note while the audio is running through? Also make sure the filter cutoff is fully clockwise.

Voltor07 · Post by **Voltor07** » Tue Sep 23, 2008 10:53 pm

Or, you can put a cable or dummy jack into the KB Gate input. Or, use a piece of gaffer's tape to hold down a few keys while the Arpeggiator is going...or...the possibilities are endless!

slabwax · Post by **slabwax** » Tue Sep 23, 2008 11:03 pm

Would a EP-2 pedal work in the kp gate input?

Dean

Voltor07 · Post by **Voltor07** » Tue Sep 23, 2008 11:07 pm

Absofrigginlutely! You can even do tap tempo with the EP-2 by moving the pedal up and down!