I need a control board or at least a Filter cutoff pot for the sub phatty

[Ihno]

Hi,
I already wrote two e-mails over the course of 2 month to the serviceparts@ e-mail adress. I didnt hear anything from you so I thought I'd write here as my mails might somehow got into the spam folder.

I have a sub phatty with a broken filter cuttoff pot. It jumps to random cutoff thresholds when turned between 10 and 1 o'clock.
I'd nee a repalcement pot or a new filter control board altogether.


I'll happily PM you my personal adress and the SN of the sub phatty!

I'm in Germany BTW.

[till]

All SubPhatty pots except the main volume are 10k linear ones. So these are easy to source. And an someone with solder experience in repairs of electronic consumer products should be able to put a new pot in place.
And notice: two of the five soldering points are just to hold the pot on the boards.
No calibration is needed, once you exchange the pot.

Maybe ask the german Moog distributer for a new pot.

Viele Grüße aus Tübingen
(greeting from Tübingen, Germany)