Kenton CV-MIDI converter + MF102?

In a Moog Mood? Here's a forum for discussion of general Moog topics.
Post Reply
rodneydel
Posts: 1
Joined: Fri May 10, 2024 4:00 am

Kenton CV-MIDI converter + MF102?

Post by rodneydel » Fri May 10, 2024 4:06 am

Hello guys,
I have the MF102-101-103. I plan to trigger my MF102’s oscillator with a MIDI keyboard. My first option is the Kenton CV-MIDI converter, but since the MF102 doesn’t have a Gate input, I’m not sure if it will work correctly, and I would like to know prior to buying the Kenton CV-Midi converter.

Any advise?

Acid Mitch
Posts: 205
Joined: Fri Nov 21, 2008 7:55 am

Re: Kenton CV-MIDI converter + MF102?

Post by Acid Mitch » Fri May 10, 2024 12:15 pm

The Oscillator is always on. There is no gate to open or close.
You can send it cv to control it's pitch/frequency.
To gate it you'd need to run it through a vca controlled by an envelope or use cv to automate the mix knob. Or you could manually hit the bypass switch.

Post Reply