MemoryMoog latest firmware for non-plus
MemoryMoog latest firmware for non-plus
Hi all,
I've been trolling around the net for a while unable to find anything I can download. I have an earlier serial number MM (non-plus) that doesn't have the autotune update. I'd like to add this but need firmware version 2.4 (or later). Anyone have the EPROM images on hand? I have the means to burn EPROMs.
Thanks in advance!
I've been trolling around the net for a while unable to find anything I can download. I have an earlier serial number MM (non-plus) that doesn't have the autotune update. I'd like to add this but need firmware version 2.4 (or later). Anyone have the EPROM images on hand? I have the means to burn EPROMs.
Thanks in advance!
Re: MemoryMoog latest firmware for non-plus
The autotune update with firmware 2.4 will only work on a Plus model. Unless you have the sequencer/MIDI expansion board, you're out of luck.
Gear list: '04 Saturn Ion, John Deere X300 tractor, ganged set of seven reel mowers for 3 acres of lawn, herd of sheep for backup lawn mowers, two tiger cats for mouse population control Oh you meant MUSIC gear Oops I hit the 255 character limi
-
- Posts: 42
- Joined: Sun Feb 04, 2007 10:15 pm
Re: MemoryMoog latest firmware for non-plus
Hello Memory Moog users,
As much as I always like and learn from MC's input on things, I need to correct his info here.
The auto tune update was designed to update the NON-Plus Memory Moog.
The Memory Moog was release with version 1.4 and was installed on 3-2532 ROM chips.
Shortly after that was version 1.5 and then 1.6. 1.6 is the most common version of the NON-plus and NON-auto tune update.
Then there was a short lived version 2.2 and then the auto tune update was released with version 2.4.
That version was quickly replaced with version 2.5 and is the most common version of the installed auto tune update.
Then came the plus upgrade, that contained an additional PC board that had the MIDI and sequencer connectors on it.
This was released with Version 4.0 and included a 4th ROM that was installed on the MIDI PC board.
Also the memory was expanded with the addition of another 6116 memory chip.
This version was also replaced with version 4.1 and is the last version of the Memory Moog plus.
I have a version 5 but have not tried to install it.
There was also a DBM Memory Moog plus after market upgrade that would give you control of MIDI channel select and volume, Pitch, Mod and foot controller via MIDI.
I have the auto tune upgrade available but it is rather involved to install.
You can PM me if interested.
Thanks.
GD
As much as I always like and learn from MC's input on things, I need to correct his info here.
The auto tune update was designed to update the NON-Plus Memory Moog.
The Memory Moog was release with version 1.4 and was installed on 3-2532 ROM chips.
Shortly after that was version 1.5 and then 1.6. 1.6 is the most common version of the NON-plus and NON-auto tune update.
Then there was a short lived version 2.2 and then the auto tune update was released with version 2.4.
That version was quickly replaced with version 2.5 and is the most common version of the installed auto tune update.
Then came the plus upgrade, that contained an additional PC board that had the MIDI and sequencer connectors on it.
This was released with Version 4.0 and included a 4th ROM that was installed on the MIDI PC board.
Also the memory was expanded with the addition of another 6116 memory chip.
This version was also replaced with version 4.1 and is the last version of the Memory Moog plus.
I have a version 5 but have not tried to install it.
There was also a DBM Memory Moog plus after market upgrade that would give you control of MIDI channel select and volume, Pitch, Mod and foot controller via MIDI.
I have the auto tune upgrade available but it is rather involved to install.
You can PM me if interested.
Thanks.
GD
Re: MemoryMoog latest firmware for non-plus
Right he is.
Factory Service Bulletin #840 covers the autotune upgrade for non-plus models, has no mention of the sequencer/MIDI board. The FSB does not specify "non-plus" only the serial # range.
FSB #841 covers the plus model.
I was going from memory. Must have had a senior moment. My apologies.
Factory Service Bulletin #840 covers the autotune upgrade for non-plus models, has no mention of the sequencer/MIDI board. The FSB does not specify "non-plus" only the serial # range.
FSB #841 covers the plus model.
I was going from memory. Must have had a senior moment. My apologies.
Gear list: '04 Saturn Ion, John Deere X300 tractor, ganged set of seven reel mowers for 3 acres of lawn, herd of sheep for backup lawn mowers, two tiger cats for mouse population control Oh you meant MUSIC gear Oops I hit the 255 character limi
- RL
- Posts: 760
- Joined: Wed May 19, 2004 4:17 am
- Location: http://www.moogmusic.de/
- Contact:
Re: MemoryMoog latest firmware for non-plus
Hi moreloud,
I can't recommend the autotune update cause the 17.4 kOhm resistors on the DMUX board are wrong and as long as you do not eliminate the bugs of the MM you will not get a better synth.
Rudi
I can't recommend the autotune update cause the 17.4 kOhm resistors on the DMUX board are wrong and as long as you do not eliminate the bugs of the MM you will not get a better synth.
Rudi
http://www.moogmusic.de/index2
-
- Posts: 42
- Joined: Sun Feb 04, 2007 10:15 pm
Re: MemoryMoog latest firmware for non-plus
Hi RL,
What should they be, for that firmware then? Just curious?
Thanks.
GD
What should they be, for that firmware then? Just curious?
Thanks.
GD
- RL
- Posts: 760
- Joined: Wed May 19, 2004 4:17 am
- Location: http://www.moogmusic.de/
- Contact:
Re: MemoryMoog latest firmware for non-plus
Hi GD,electrojoe wrote:Hi RL,
What should they be, for that firmware then?
leave them (115KOhms/1%) and change resistors R1, R32 and R72 (1MOhms/1%) to 249kOhms/1% on the voice cards.
Rudi
http://www.moogmusic.de/index2
-
- Posts: 42
- Joined: Sun Feb 04, 2007 10:15 pm
Re: MemoryMoog latest firmware for non-plus
Thanks RL!
I will do that on my next update install.
GD
I will do that on my next update install.
GD
Re: MemoryMoog latest firmware for non-plus
electrojoe, sent you a PM
Thanks!
Thanks!
-
- Posts: 45
- Joined: Thu Mar 16, 2006 4:30 pm
Re: MemoryMoog latest firmware for non-plus
I hate to revive such an old thread but, can I ask if this voice board modification is 'instead of' the complete auto-tune upgrade? Or just instead of the resistor change on the DMUX board? I have an early SN that doesn't have the upgrade done to it yet and I'm running 1.6 but planned to do it and then saw this thread...
memorymoog #1257 | minimoog model d reissue
Re: MemoryMoog latest firmware for non-plus
hi ! i'm also interested in this autotune update... last thing i need to do on my memory. can you confirm the 17.4k resistor substitution with the 3 ones on each voice card please ?
- analogmonster
- Posts: 283
- Joined: Wed Nov 24, 2010 9:50 am
- Location: Germany
- Contact:
Re: MemoryMoog latest firmware for non-plus
Does anybody know whether the firmware assembler sources exist and if so who has them?
Newest Track: https://soundcloud.com/analogmonster-1/ ... istsBelief
Analogmonster: https://www.analog-monster.de/index_en.html
Youtube: https://www.youtube.com/channel/UCnYrLi ... O_YNfM9YAw
Soundcloud: https://soundcloud.com/analogmonster-1
Analogmonster: https://www.analog-monster.de/index_en.html
Youtube: https://www.youtube.com/channel/UCnYrLi ... O_YNfM9YAw
Soundcloud: https://soundcloud.com/analogmonster-1
Re: MemoryMoog latest firmware for non-plus
Rudi Linhard?analogmonster wrote: ↑Wed Mar 27, 2024 3:30 am Does anybody know whether the firmware assembler sources exist and if so who has them?
keep on turning these Moog knobs
Sequence:
Prodigy * minimoog '79 * Voyager * MF102 * MF103 * MF104z * MP201 * Taurus 3 * Minitaur * Sub Phatty * MF105 * Minimoog 2017+ MUSE * One 16
Sequence:
Prodigy * minimoog '79 * Voyager * MF102 * MF103 * MF104z * MP201 * Taurus 3 * Minitaur * Sub Phatty * MF105 * Minimoog 2017+ MUSE * One 16
- analogmonster
- Posts: 283
- Joined: Wed Nov 24, 2010 9:50 am
- Location: Germany
- Contact:
Re: MemoryMoog latest firmware for non-plus
Yes, that's true. A friend confirmed that yesterday to me.till wrote: ↑Thu Mar 28, 2024 12:00 pmRudi Linhard?analogmonster wrote: ↑Wed Mar 27, 2024 3:30 am Does anybody know whether the firmware assembler sources exist and if so who has them?
Thanks
Newest Track: https://soundcloud.com/analogmonster-1/ ... istsBelief
Analogmonster: https://www.analog-monster.de/index_en.html
Youtube: https://www.youtube.com/channel/UCnYrLi ... O_YNfM9YAw
Soundcloud: https://soundcloud.com/analogmonster-1
Analogmonster: https://www.analog-monster.de/index_en.html
Youtube: https://www.youtube.com/channel/UCnYrLi ... O_YNfM9YAw
Soundcloud: https://soundcloud.com/analogmonster-1