Need help with moogerfooger analog delay MF-104Z

[schwaggart]

I have an mf-104z analog delay that works great through my amp but when I tried to record through an interface I could only hear the delay out. Does anyone know how to fix this issue? Thanks in advance

[stiiiiiiive]

Hi!

You may have been using the DELAY OUT with your amp FX loop. This only outputs the delayed signal.
With an audio interface, I think using the AUDIO OUT will work better as it outputs both the direct and delayed signals.

[schwaggart]

Hi!

You may have been using the DELAY OUT with your amp FX loop. This only outputs the delayed signal.
With an audio interface, I think using the AUDIO OUT will work better as it outputs both the direct and delayed signals.

Unfortunately that doesn't seem to be the issue. I re-read the manual and am using the MIX OUT but the issue remains the same no matter what output I use.

[stiiiiiiive]

What is the position of the mix knob?

[schwaggart]

What is the position of the mix knob?

I have tried the mix knob in many positions but nothing changes.

[stiiiiiiive]

Cannot seem to understand :/

You may have to isolate and test every possible problem/error source, meaning cable, output setting.
But wait: same mix setting, same output, same cable: it will work on your amp on not on your interface?

Just to be sure: are you using the FX loop on your amp? Or the direct input? THAT can make a difference, of course.
If you use the frint input (guitare -> MF -> Amp), with mix set to 50%, with the MAIN OUT, use the longest time setting and check if you have direct sound or not.

[stiiiiiiive]

Any results?

[schwaggart]

No success yet, but I was not accurate with my description. My amp was in the shop when I first made this post and now that I have tested the 104z the same issue is occurring. Delay signal but no direct signal. Any suggestions?

[schwaggart]

Any results?

No success yet, but I was not accurate with my description. My amp was in the shop when I first made this post and now that I have tested the 104z the same issue is occurring. Delay signal but no direct signal. Any suggestions?

[stiiiiiiive]

Well, no more than the last time.
Don't understand if you've tested what I suggested last time...