change presets via Program Change Comands

Welcome to the Taurus, Minitaur and Sirin Forum
Post Reply
daddyrnr
Posts: 3
Joined: Tue Nov 20, 2012 12:28 pm
Location: NE Ohio

change presets via Program Change Comands

Post by daddyrnr » Thu Dec 19, 2019 2:52 pm

Been a while since I have been here in the forum and thought I would ask the question again. I am trying to incorporate my Minitaur into my live rig where I use my Motif XF7 to control all my patch setups. As of the last ask..this was not possible and you had to use the software with a PC to make this happen or go thru the face and "guess' what patch you were on.

Is there any change in the newer firmware as it has been a while since i have played with my minitaur. Or......I am only using it for Moog bass for a rush tribute and have the ability to save the patch to the "power up" patch so I do not need to worry about changing patches?


Thanks in advance

User avatar
misterpete
Posts: 392
Joined: Wed Oct 26, 2011 9:16 am

Re: change presets via Program Change Comands

Post by misterpete » Tue Dec 24, 2019 7:32 am

my clunky old original silver plastique Oxygen 8 (only 25 key)controller can send MIDi CCs which you can select with its LCD but its at least as large as a laptop, and not nearly as powerful

i wonder if the new tiny popular controllers like Keystep can send CCs ?
Please Call Me, PETE
https://petedako.bandcamp.com/music
"Mr. Pete" at ModWiggler @petedako on Twitter,
Bandcamp & all the other platforms :D

Post Reply