After Midi Learn only one similar output signal

Welcome to the Taurus, Minitaur and Sirin Forum
Post Reply
DonGonzales
Posts: 2
Joined: Tue Jul 05, 2016 3:07 pm

After Midi Learn only one similar output signal

Post by DonGonzales » Tue Jul 05, 2016 3:13 pm

Hey there,
i got my minitaur today and was really happy, everything worked nice in combination with my roland pk5 base pedal. Then I connected the Taur via usb to my laptop and updated the firmware. when I put it back on the amplifier and the pk5 there wasn't any output signal anymore. so i tried the "hit the 4 buttons"-midi-learn thing with the pk5 and the result was, that all what was coming out was on similar tone. i turned every knob and hit every single pedal on the pk5... the same tone over and over.
I really don't know what went wrong so if you PLEASE could help me. It would be so great.
Thanks a lot!!!

felis
Posts: 23
Joined: Mon Jun 20, 2016 10:59 am

Re: After Midi Learn only one similar output signal

Post by felis » Tue Jul 05, 2016 11:02 pm

Which firmware did you install, and do you still have the firmware file that worked before?

DonGonzales
Posts: 2
Joined: Tue Jul 05, 2016 3:07 pm

Re: After Midi Learn only one similar output signal

Post by DonGonzales » Wed Jul 06, 2016 3:19 am

i applied the 2.0.0 and the one wich was applied before was the one it came with. now... next problem popped up this morning... my laptop doesn't recognize the unit anymore....

User avatar
paramnesia
Posts: 126
Joined: Tue Mar 03, 2015 11:35 am
Location: Asheville, NC
Contact:

Re: After Midi Learn only one similar output signal

Post by paramnesia » Thu Jul 07, 2016 11:27 am

which version of the USB Moog Midi driver are you using?
Sub37TE V1.2 / 4 X CP-251, 3 x MF-104M, MF-102, MF-107, MF-108M, 4 x Mother32, MP-201
My Eurorack https://www.modulargrid.net/e/racks/view/2268669
My Pedal Board https://www.modulargrid.net/p/racks/view/461843

charbot
Posts: 42
Joined: Tue Aug 26, 2014 9:41 pm

Re: After Midi Learn only one similar output signal

Post by charbot » Thu Jul 07, 2016 5:56 pm

is the sound a very low grumble? Do the note calibration routine. similar thing happened to me recently

felis
Posts: 23
Joined: Mon Jun 20, 2016 10:59 am

Re: After Midi Learn only one similar output signal

Post by felis » Fri Jul 08, 2016 8:29 am

I'm not sure what you're supposed to do with the calibration routine thing, but I used it recently.
I just let it go for a long time and then turned every knob. It seemed to be doing a lot of sweeps - filter and oscillator and whatnot.
No real directions I could find for it pertaining to how long it should take to complete.

Post Reply