Hi,
can someone tell me what the newest problem is ?
I attached a soundfile of my minitaur.
After some firmw. update i have this noise in my notes.
Dont know when it started.
But its not up to firmwire 2.8
But with 2.16-21 i have this noise.
You can hear it best when the note is ending.
This kind of scratching noise in the backround of the note.
Any help ?
http://www.megafileupload.com/en/file/4 ... d-mp3.html
Sorry dont know how i can submit the file on an better way.
Hope someone listen to it.
Minitaur new background noise since update amos
-
- Posts: 27
- Joined: Fri Jan 18, 2013 4:11 pm
Re: Minitaur new background noise since update amos
i heard this noise in earlier versions but on my Minitaur I don't hear it now.
Try this firmware and tell me if the noise is the same:
http://www.moogconnect.net/downloads/mi ... 2_0_22.syx
if it is, next try turning down the Ext. Input level on your Minitaur (using the editor, or midi CC# 27) and see if the noise goes away. Let me know in either case.
Thanks!
Amos
Try this firmware and tell me if the noise is the same:
http://www.moogconnect.net/downloads/mi ... 2_0_22.syx
if it is, next try turning down the Ext. Input level on your Minitaur (using the editor, or midi CC# 27) and see if the noise goes away. Let me know in either case.
Thanks!
Amos
-
- Posts: 27
- Joined: Fri Jan 18, 2013 4:11 pm
Re: Minitaur new background noise since update amos
Thank you for your fast reply.
Im sorry the update doesnt change the problem.
Ext Audio is down.
Im sorry the update doesnt change the problem.
Ext Audio is down.
-
- Posts: 27
- Joined: Fri Jan 18, 2013 4:11 pm
Re: Minitaur new background noise since update amos
Sounds good with the .23 update
The noise seems to be gone.
Not 100% sure if its 100 % gone.
But much better.
And i think its OK
Thank you for midnight exchange
The noise seems to be gone.
Not 100% sure if its 100 % gone.
But much better.
And i think its OK
Thank you for midnight exchange
Re: Minitaur new background noise since update amos
Old topic, but I too have this problem... My Minitaur is on firmware version 2.1.1. The noise starts to be audible after note starts to fade away, it goes around 5khz. Also, when I turn off usb cable the noise is little bit quieter but still there. On first firmware I had there was no noise at all. Other forum member posted soundcloud link with sample, it basically sounds the same https://soundcloud.com/cyklops/moog-mt- ... -a/s-fc0u9
Any suggestions? Thanks!
Any suggestions? Thanks!
Re: Minitaur new background noise since update amos
Hi,
I have the same exact noise on my minitaur also, latest firmware. It varies in speed with the amp decay knob.
Please Amos !
I have the same exact noise on my minitaur also, latest firmware. It varies in speed with the amp decay knob.
Please Amos !