Firmware update MF-105M?

Plug in here for info tips and strategies for your Moogerfooger Analog Effects. Connect more than one for plenty of fun!
deadhedgehog
Posts: 64
Joined: Sun Sep 15, 2013 9:33 am
Location: Norway
Contact:

Firmware update MF-105M?

Post by deadhedgehog » Tue Dec 02, 2014 7:03 am

I am loving the Midimurf, it is a central point of my setup. The pattern editor is vital to me.

I find that I can't load stored patterns from my computer. The patterns are stored without an extension, could this be the key to the problem? Is there a simple workaround or is this a firmware issue?

Fixing this would be a huge timesaver for me. I remember reading that others have experienced this too... anyone?

I use a mac OSX 10.6.8 (old, i know)

Thanks :mrgreen:

deadhedgehog
Posts: 64
Joined: Sun Sep 15, 2013 9:33 am
Location: Norway
Contact:

Re: Firmware update MF-105M?

Post by deadhedgehog » Tue Dec 02, 2014 2:52 pm

Re-reading my question I think that it is primarily a software issue, rather than a firmware issue. So I see that now. :oops:

Still think it would be ACE if it worked though, would still like to know if this affects others

deadhedgehog
Posts: 64
Joined: Sun Sep 15, 2013 9:33 am
Location: Norway
Contact:

Re: Firmware update MF-105M?

Post by deadhedgehog » Wed Dec 03, 2014 6:43 am

I now found this, from a thread in 2010

http://forum.moogmusic.com/viewtopic.ph ... 292#p73292

No answer from soundtower yet?

Alien8
Posts: 503
Joined: Thu Oct 12, 2006 7:55 am
Location: Canada!!

Re: Firmware update MF-105M?

Post by Alien8 » Wed Dec 03, 2014 10:51 am

The firmware has bugs too that make using it live a real pain in the butt...

http://forum.moogmusic.com/viewtopic.ph ... re#p107607

I too would really like to see these bugs gone!
Vibration emanates from all things, even nothing. Using awareness to translate vibration into "music" is something that I am whole heartedly grateful for.

deadhedgehog
Posts: 64
Joined: Sun Sep 15, 2013 9:33 am
Location: Norway
Contact:

Re: Firmware update MF-105M?

Post by deadhedgehog » Thu Dec 04, 2014 5:49 am

I never used a TRS cable with the Murf, I just use it as EQ/drum machine. But I can see how that would be annoying too.

I sent a mail to the software people but I haven't heard anything yet. Was hoping somebody from Moog could tell me if any update to the software was planned.

*Edit, @alien8, are you using one of these?

http://www.moogmusic.com/products/acces ... ep-adaptor

Alien8
Posts: 503
Joined: Thu Oct 12, 2006 7:55 am
Location: Canada!!

Re: Firmware update MF-105M?

Post by Alien8 » Thu Dec 04, 2014 9:23 am

Nope, I just use a stereo to mono Y cable. The adapter simply routes the tip signal from the step
pedal / input signal to the ring terminal. The Moog adapter is a much more elegant way to do it.

If you read the threads, others are having the same "have to unplug and replug when you change patterns" issue using the Moog Adapter. I'm also experiencing the save uses as you do. I'm on OS 10.8.
Vibration emanates from all things, even nothing. Using awareness to translate vibration into "music" is something that I am whole heartedly grateful for.

User avatar
Vsyevolod
Posts: 712
Joined: Thu Mar 29, 2012 4:38 pm
Location: Seattle

Re: Firmware update MF-105M?

Post by Vsyevolod » Mon Dec 08, 2014 6:20 pm

Hoping that SoundTower fixes their (rather) sketchy software editor is like hoping that Republicans and Democrats will all get along.

Hate to be the harbinger of bad news, but if your editor is not working to your liking, it probably never will. That's the nature of SoundTower. You'll note that Moog is doing all their newer editors in-house now.

Stephen




.

deadhedgehog
Posts: 64
Joined: Sun Sep 15, 2013 9:33 am
Location: Norway
Contact:

Re: Firmware update MF-105M?

Post by deadhedgehog » Tue Dec 09, 2014 7:58 am

I don't see why it should be so difficult to implement small changes to address the bug I mentioned? Hardly a huge programming challenge? :?:

User avatar
Vsyevolod
Posts: 712
Joined: Thu Mar 29, 2012 4:38 pm
Location: Seattle

Re: Firmware update MF-105M?

Post by Vsyevolod » Thu Dec 11, 2014 6:21 pm

Not to beat a dead horse, though SoundTower has a terrible reputation for making even simple changes to their software. Check out any of the threads here and on other manufacturers websites where this is documented time and time again.

Stephen




.

mattywashington
Posts: 19
Joined: Tue Jun 15, 2010 5:27 pm

Re: Firmware update MF-105M?

Post by mattywashington » Sun Jan 18, 2015 1:15 am

I was OP on the 2010 post. I never heard back from soundtower even after numerous emails back to them. After about a year I gave up hope...

It's sad too because you can get some pretty gnarly patterns...

Alien8
Posts: 503
Joined: Thu Oct 12, 2006 7:55 am
Location: Canada!!

Re: Firmware update MF-105M?

Post by Alien8 » Sun Jan 18, 2015 10:25 am

Yeah, this is actually a big piss-off for me. The reason I purchased the Midi version was to be able to program and save presets. The more I use it lately, the more I want to do this, only to find that I have to take a screen shot of the preset and reprogram it if it's not saved to the unit.

I see they have a Facebook profile. Maybe we would voice our upset at the poor function publicly so everyone can see the lack of support / not releasing completed & tested software.
Vibration emanates from all things, even nothing. Using awareness to translate vibration into "music" is something that I am whole heartedly grateful for.

deadhedgehog
Posts: 64
Joined: Sun Sep 15, 2013 9:33 am
Location: Norway
Contact:

Re: Firmware update MF-105M?

Post by deadhedgehog » Sun Jan 18, 2015 12:48 pm

For the record, I also sent them an email through their website and haven't heard anything back.

User avatar
Vsyevolod
Posts: 712
Joined: Thu Mar 29, 2012 4:38 pm
Location: Seattle

Re: Firmware update MF-105M?

Post by Vsyevolod » Tue Jan 20, 2015 4:49 pm

Also for the record, I have done Beta testing for them (for another manufacturer) and they will fix perhaps 10% of really important bugs, and if that's not bad enough, they'll take a year and a half to do it. And then come online and publicly bad-mouth their very own hard working Beta testers. BTW, SoundTower is pretty much just one person, Mark. You can email him all you want and get nada, zilch, silence in return. Try leaving public feedback on his Facebook page and see how long it takes for him to kick you off his 'Friends' list...

Moog has done the wise thing and kicked SoundTower out of any future editor work possibilities. They do all their editors in-house now.

Stephen




.

c7sus
Posts: 468
Joined: Sun Aug 14, 2005 5:42 pm

Re: Firmware update MF-105M?

Post by c7sus » Wed Jan 21, 2015 12:23 am

Try searching for extension .murf.

That is the extension in WinXP, don't know if they use the same in Mac OS.
Voyager EB #165, T3 #292, MF-101, 102, 103, 104SD, 2x104MSD, 105M, 107, 108M, MP-201, VX-351, CP-251, Frostwave Fat Controller.

Sentenced
Posts: 5
Joined: Wed Feb 04, 2015 3:52 pm

Re: Firmware update MF-105M?

Post by Sentenced » Wed Feb 04, 2015 5:22 pm

Alien8 wrote:The firmware has bugs too that make using it live a real pain in the butt...

http://forum.moogmusic.com/viewtopic.ph ... re#p107607

I too would really like to see these bugs gone!
:!:

+1

Post Reply