Werkstatt on it's way :)

Everything Werkstatt.
Post Reply
mmarsh100
Posts: 370
Joined: Thu May 16, 2013 12:36 pm

Werkstatt on it's way :)

Post by mmarsh100 » Fri Jun 27, 2014 12:46 pm

Just got my shipping notice and tracking # from Sweetwater :)

User avatar
Fantastca
Posts: 63
Joined: Mon Feb 18, 2013 3:17 pm
Location: London, UK.

Re: Werkstatt on it's way :)

Post by Fantastca » Fri Jun 27, 2014 4:39 pm

Amazing thread.

Well.. what can I say.

Good for you.
Moog Sub Phatty (firmware 2.1.12 beta, editor 1.1.0) | Ableton Live 9.7 | macOS Sierra 10.12.3

mmarsh100
Posts: 370
Joined: Thu May 16, 2013 12:36 pm

Re: Werkstatt on it's way :)

Post by mmarsh100 » Fri Jun 27, 2014 6:14 pm


kn_s
Posts: 71
Joined: Sat Aug 10, 2013 12:07 am
Location: paoli, pa
Contact:

Re: Werkstatt on it's way :)

Post by kn_s » Sun Jun 29, 2014 9:49 pm

After playing around with mine this weekend the one thing I think I wanted to add most was a power on/off button/switch. I felt like I was going to fry it every time I just pulled the plug
LP solar, minitaur, m32, werkstatt, 101/102/103/104m/105m/107/108m,cp-251,mf delay v1&2+drivev2, microkorg, monologue, volcas, monotribe & trons, sq-1, too many pedals!, guitars, '07 imac (10.11.6), simmons sds7, & now eurocrack, etc...

grenert
Posts: 90
Joined: Thu Jun 19, 2014 4:10 pm

Re: Werkstatt on it's way :)

Post by grenert » Sun Jun 29, 2014 11:32 pm

kn_s wrote:After playing around with mine this weekend the one thing I think I wanted to add most was a power on/off button/switch. I felt like I was going to fry it every time I just pulled the plug
Not sure the size of the plug, but if the same, this could be useful:
www.adafruit.com/products/1125

Alternatively, an inline switch like you might use for a lamp could be used. They work better with zip-cord type wires, but could work with a single round cable as well. I added an on-off switch to my Tetra this way.
Here's instructions for a lamp:
http://www.diynetwork.com/how-to/how-to ... index.html

Since the Moog cord will likely be much smaller, you may want to secure the cable with hot glue.
Moog stuff: Slim Phatty, Minitaur, Mother-32, Werkstatt x2, MF-103, MF-104M, MF-108M
Running Moog software on Win7 64-bit
Dreams of a Voyager XL some day...

Post Reply