Hi all,
I bought my Little Phatty Stage II a few years ago and have never really had any problems with it...
However, yesterday I was trying to incorporate it into my midi set up and it wouldn't work.
I was trying to control the output volume with an expression pedal through my voodoo labs ground control pro.
But no response at all. I have them set on the correct midi channel (3), and set the expression pedal control number to CC7 (the one the book lists for controlling output volume). Any suggestions please please please?
Best,
Clark
Little Phatty Stage II Not Receiving Midi Signals
-
Moog Music
- Posts: 71
- Joined: Fri Feb 10, 2012 11:09 am
Re: Little Phatty Stage II Not Receiving Midi Signals
Hi Clark29,
Make sure your Little Phatty is set to the same MIDI channel as your GCpro.
Also, ensure you have DIN/USB set as the input source for MIDI on your LP.
More details are available on page 31:
http://www.moogmusic.com/sites/default/ ... l_v2_2.pdf
If you have any further questions, please contact our support department:
http://www.moogmusic.com/contact
-Your Friends at Moog
Make sure your Little Phatty is set to the same MIDI channel as your GCpro.
Also, ensure you have DIN/USB set as the input source for MIDI on your LP.
More details are available on page 31:
http://www.moogmusic.com/sites/default/ ... l_v2_2.pdf
If you have any further questions, please contact our support department:
http://www.moogmusic.com/contact
-Your Friends at Moog