Murf drive.

Plug in here for info tips and strategies for your Moogerfooger Analog Effects. Connect more than one for plenty of fun!
Post Reply
darmanmerdeka
Posts: 6
Joined: Sun Sep 15, 2013 1:02 pm

Murf drive.

Post by darmanmerdeka » Sat Nov 09, 2013 7:37 am

Hi,
Just bought my murf 3 days ago..using it with my drum machine.
I don't understand why the drive knob has no effect at all.the drive light just keep red.
Do i miss something here?
Sorry for my english,i'm from indonesia.

Thank you.
Darman.

yesman
Posts: 55
Joined: Mon Dec 28, 2009 1:32 pm

Re: Murf drive.

Post by yesman » Sat Nov 09, 2013 12:01 pm

The signal from your drum machine is probably too high, try backing off the output at the drum machine.

darmanmerdeka
Posts: 6
Joined: Sun Sep 15, 2013 1:02 pm

Re: Murf drive.

Post by darmanmerdeka » Sat Nov 09, 2013 12:58 pm

I put my drum machine level very soft,the drive's light goes green and when i turn the drive knob,still not fuction at all.
I try with my other synth (soft level),but the drive knob still not respond.
Thank's for the replay.

User avatar
Vsyevolod
Posts: 712
Joined: Thu Mar 29, 2012 4:38 pm
Location: Seattle

Re: Murf drive.

Post by Vsyevolod » Sat Nov 09, 2013 4:27 pm

Send your drum machine through a mixer and out via an Aux send to get the levels down to a 'normal' level.

Selamat Tingal,

Stephen




.

darmanmerdeka
Posts: 6
Joined: Sun Sep 15, 2013 1:02 pm

Re: Murf drive.

Post by darmanmerdeka » Sat Nov 09, 2013 5:04 pm

yesman wrote:The signal from your drum machine is probably too high, try backing off the output at the drum machine.
yes i did,it's almost zero,light goes green but the drive knob still no effect.

darmanmerdeka
Posts: 6
Joined: Sun Sep 15, 2013 1:02 pm

Re: Murf drive.

Post by darmanmerdeka » Sun Nov 10, 2013 7:54 am

Vsyevolod wrote:Send your drum machine through a mixer and out via an Aux send to get the levels down to a 'normal' level.

Selamat Tingal,

Stephen




.
yesman wrote:The signal from your drum machine is probably too high, try backing off the output at the drum machine.
may be the signal from my drum machine is not the problem,its low enough.
just the drive knob isn't respond anything.
thank you for replay.

terima kasih
darman.

User avatar
Vsyevolod
Posts: 712
Joined: Thu Mar 29, 2012 4:38 pm
Location: Seattle

Re: Murf drive.

Post by Vsyevolod » Mon Nov 11, 2013 3:33 pm

What happens when you run another instrument through it? I sometimes get confusing results when I patch other electronic gear through my Foogers.

Stephen




.

darmanmerdeka
Posts: 6
Joined: Sun Sep 15, 2013 1:02 pm

Re: Murf drive.

Post by darmanmerdeka » Mon Nov 11, 2013 5:38 pm

[quote="Vsyevolod"]What happens when you run another instrument through it? I sometimes get confusing results when I patch other electronic gear through my Foogers.

Stephen

Just the same when i use with my drum machine,I cant do anything with the drive knob.
I'm new with electronic but in my short experience,i guess it depends on many aspect such as the character of the pitch,rhythm,melody and harmony that we apply to it.

Darman.

User avatar
Vsyevolod
Posts: 712
Joined: Thu Mar 29, 2012 4:38 pm
Location: Seattle

Re: Murf drive.

Post by Vsyevolod » Tue Nov 12, 2013 12:11 am

It's also possible that you have a defective unit.

I'd write to Moog, explaining your situation as thoroughly as possible and I'm sure that they'll have a great response for you.

Stephen




.

darmanmerdeka
Posts: 6
Joined: Sun Sep 15, 2013 1:02 pm

Re: Murf drive.

Post by darmanmerdeka » Tue Nov 12, 2013 4:55 am

I call tech.support in Moog music yesterday & kindly he ask me to send the unit back to the dealer where i bought.
They will repair or change it with another unit,thats what he said.
Thank you Stephen.

Post Reply