MFB Step64 & LP Tribute

Everything Phatty.
Posts: 107
Joined: Tue Mar 25, 2008 4:08 am

Post by MichaelPeterTrowbridge » Sun Feb 28, 2010 6:07 pm

Hi acorkos

Using the MIDI connection rather than the CV works perfect! Fantastic result! Thank you ever so much for!

Posts: 18
Joined: Fri Mar 12, 2010 3:59 am

Post by poladark » Fri Mar 12, 2010 4:19 am

I have a similar problem with my MFB SEQ-02 module and the LP. The oscillators don't seem to track completely with the output. Anticipating the risk of high current drain I tried hooking it up through a Doepfer A-185 active bus access module with pretty much the same result.

The manual mentions that the oscillators are "nominally" 1v/octave. Does this mean that it's not supposed to track completely?

There's also a problem with the gate input on the LP. It seems to be "triggered" whenever i plug a cable in.

Sir Nose
Posts: 1024
Joined: Sat Sep 20, 2008 11:15 am

Post by Sir Nose » Fri Mar 12, 2010 8:42 am

Yeah, the LP is .97V/Oct or something like that. Not quite 1. The CV out mod does send 1V per octave out though.

Post Reply